Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEED LIFT, PLEASE HELP!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 56
Joined: Sun Mar 23, 2008 11:51 pm
Location: Yeppoon

NEED LIFT, PLEASE HELP!

Post by BigrigCQ »

Hi I'm trying to find a 4" suspension lift for 98 coily sierra.

Any help would be great!
:twisted:
Posts: 136
Joined: Mon Jul 30, 2007 5:55 pm
Location: Brizzy

Post by Big D »

fat chance
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

WHY???
It's not like a coily will handle a tyre bigger than a 30 or 31 anyway and SWB's are scary with lotsa lift.
Jas.
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Maybe look for 2" coils and 2" body?? Not sure how youd go in QLD though.
And for the non belivers my mate and I both bought coilys new in 96.
By the end of the year my mate ran 4" custom coils with 30s, then the next year did away with front struts to run 6"springs 3" body and 33s.
Crazy height I know but besides using modded rangie control arms everything was stock and wheeled hard, some may remember a white coily doing a nose stand at nissan trails that was replayed on funniest home videos.
Nik
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

With the coily arms you will have huge dramas with 4" coils, you'll need custom arms. That said 2+2 is fine in Qld, 2" coils will be ok and someone I know :roll: sells Body Lifts
;)
Posts: 136
Joined: Mon Jul 30, 2007 5:55 pm
Location: Brizzy

Post by Big D »

lol the bigger rubber i think wont b so ok with the boys in blue.
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

2 inch spring 2 inch body you won't run into any probs other than possible bent rear arms if you have crazy long shocks.
Posts: 56
Joined: Sun Mar 23, 2008 11:51 pm
Location: Yeppoon

Post by BigrigCQ »

Thanx everyone, Its all ready running 3" Snake racing body lift, 30" Buckshots with a 1.6 Vitara motor.

And we want to run 33"
on F100 or Wrangler offset Pro Comp Krawler 15x8 rims

Where would I get a suspension lift for one of these, I went to the Dobinsons Springs Factory and they said the don't do anything for the coily!
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

you can't get a factory 4" lift as the coily suspension design is crap. Do a bit of a search on here as it has been mentioned. Also the 33" tyre is illegal in QLD on a Sierra. You will also have major gearing issues trying to run a 33 which means swapping out the t/case for a leafy one and then installing gearing plus $$$ for stronger axles and cvs.

Why do you want to run a 33?
Ransom note = demand + collage
Posts: 56
Joined: Sun Mar 23, 2008 11:51 pm
Location: Yeppoon

Post by BigrigCQ »

The car is my little brothers and he wants it to crawl and sit nice and high out of the water in the creeks we drive, Most 33'' tyres are actually 32'' if you work it out in milimeters

We have a set of MAXXIS MUDZILLAS 33''x13.50x15 of my GQ Patrol

It is really to widen the track, because the body is so stiff because of the Rollcage it will make it more stable driving some hill faces Hopefully!
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Ok you really really really need to slow down and have a good look through the bible. Seriously you are going about things the wrong way. If you wish to widen the track you need offset rims not tall tyres, although what you want to help climb hills is more wheelbase (which you'll need for tall tyres anyway) and that wouldn't be easy to achieve in a coily I'd imagine.

As said, coily's have their limitations in anything close to stock configuration. If you want to go wild with the mods (and 33's believe it or not are pretty wild for a zook) then it may be easier for a beginner to just buy a leafy and sell the coily.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Might have been a good idea to list exactly what you have and what you want to do straight from the beginning rather then draw it out till now to tell us the real issue and what you want to do.
;)
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

also note that maxxis tyres are renowned for measuring WAY under!... Simex on the other hand are the opposite - their 31's measure 32... hence you could legally run a simex 31 and still have the same size tyre as a maxxis 33! The govt. dont care about the exact measurement, just the size moulded into the sidewall.
The worst thing about censorship is ███████.
Posts: 136
Joined: Mon Jul 30, 2007 5:55 pm
Location: Brizzy

Post by Big D »

wot u mean legally? and the biggest suspension lift in know of, off the shelf is the king/ultima ones from onestop suzi shop. or ebay and their about 40mm raisded
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

BigrigCQ wrote:The car is my little brothers and he wants it to crawl and sit nice and high out of the water in the creeks we drive, Most 33'' tyres are actually 32'' if you work it out in milimeters

We have a set of MAXXIS MUDZILLAS 33''x13.50x15 of my GQ Patrol

It is really to widen the track, because the body is so stiff because of the Rollcage it will make it more stable driving some hill faces Hopefully!
Wow, this is a really confusing post.

A) Who cares what size it says on the sidewall, it either fits or it doesn't.

B) Even a 2" lift does more harm than good on a coiler in relation to off road behaviour.

C) Buy a snorkel

E) What does a roll cage have to do with how stable a car is?

F) "Rockcrawling" isn't the same as "posing" You won't want a sierra with 10" of total lift, 22 spline front axles and stock wheelbase for "rockcrawling"

Do some research.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 191
Joined: Sat Jul 28, 2007 12:43 pm
Location: Vic

Post by 86slowsierra »

Gwagensteve wrote:
BigrigCQ wrote:The car is my little brothers and he wants it to crawl and sit nice and high out of the water in the creeks we drive, Most 33'' tyres are actually 32'' if you work it out in milimeters

We have a set of MAXXIS MUDZILLAS 33''x13.50x15 of my GQ Patrol

It is really to widen the track, because the body is so stiff because of the Rollcage it will make it more stable driving some hill faces Hopefully!
Wow, this is a really confusing post.

A) Who cares what size it says on the sidewall, it either fits or it doesn't.

B) Even a 2" lift does more harm than good on a coiler in relation to off road behaviour.

C) Buy a snorkel

E) What does a roll cage have to do with how stable a car is?

F) "Rockcrawling" isn't the same as "posing" You won't want a sierra with 10" of total lift, 22 spline front axles and stock wheelbase for "rockcrawling"

Do some research.

Steve.

:onfire: Burned
[quote="v840"]Her:"Awww thats so sweet I love a man who is in touch with his blah blah blah"

You:"Giggidy."[/quote]
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

.

Post by lukes4x4 »

I`ve done a 5 inch kit on a coily in just the suspension alone. the customer had the same probs trying to find a off the shelf kit. so i custom made some front struts rotated the diff for castor new custom coils front and rear etc, etc. If i was to do it again i would do a 4 inch kit but only for serious people. So many people ring up dreaming without money. So if you have a spare $2500 give me a call. cheers

LUKEYS 4X4 CUSTOMS - 0409 991742
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Re: .

Post by GRPABT1 »

lukes4x4 wrote:I`ve done a 5 inch kit on a coily in just the suspension alone. the customer had the same probs trying to find a off the shelf kit. so i custom made some front struts rotated the diff for castor new custom coils front and rear etc, etc. If i was to do it again i would do a 4 inch kit but only for serious people. So many people ring up dreaming without money. So if you have a spare $2500 give me a call. cheers

LUKEYS 4X4 CUSTOMS - 0409 991742
Have you spoken to this customer since? Did you also include some trailing arms?

Edited cause I can't spell whilst drunk :D
Last edited by GRPABT1 on Fri Jun 13, 2008 12:49 pm, edited 1 time in total.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 271
Joined: Wed Aug 30, 2006 8:15 pm
Location: LLANDILO N.S.W 2747

.

Post by lukes4x4 »

Yes i`ve spoke to him quite a few times regarding other stuff and he loves it. got no idea what you mean about sutome trailing arms???
The problem with this forum half the time is someone asks for help or a solution. Then you tell them what has worked in which it does, and then they just want to pick you on everything about it. Anyway until you have done it you can`t come to conclusions...... you`d think.
LUKEYS 4X4 CUSTOMS - 0409 991742
LLANDILO N.S.W 2747 - SYDNEY
www.lukeys4x4.com
HARDCORE GEAR AND SUSPENSION
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Re: .

Post by lay80n »

lukes4x4 wrote:Yes i`ve spoke to him quite a few times regarding other stuff and he loves it. got no idea what you mean about sutome trailing arms???
The problem with this forum half the time is someone asks for help or a solution. Then you tell them what has worked in which it does, and then they just want to pick you on everything about it. Anyway until you have done it you can`t come to conclusions...... you`d think.

I guess he means strengthened control arms. Having seen standard coily arms bend even when not abused, some custom arms are almost essiential if you going to mod a coily and drive it hard.

If you already have a 3 inch body lift, why not just look at a 2 inch spring lift and then cut guards/bump stops etc to fit 33's.

Or if in doubt - just read Steve's post above.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Posts: 215
Joined: Mon Mar 24, 2008 12:43 pm
Location: Mid Nth Coast

Post by DavePatrol »

hay lukes4x4 what is included in the 4 inch kit
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Re: .

Post by GRPABT1 »

lukes4x4 wrote:Yes i`ve spoke to him quite a few times regarding other stuff and he loves it. got no idea what you mean about sutome trailing arms???
The problem with this forum half the time is someone asks for help or a solution. Then you tell them what has worked in which it does, and then they just want to pick you on everything about it. Anyway until you have done it you can`t come to conclusions...... you`d think.
I wasn't shit bagging you or your work mate, it's just that it's pretty common knowledge that coily control arms are weak as piss and I've watch a couple of nice coily build up threads and eventually new control arms or at least modified ones are needed.

Wheres spamwell when you need him?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Post Reply

Who is online

Users browsing this forum: No registered users and 82 guests