Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jimny Sierra diff centres

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Jimny Sierra diff centres

Post by Squik »

Is there any truth to the rumours that the crown and pinion from the new Jimny Sierras drop straight into the older models and offer a better ratio?

Got chatting to a bloke up here on the Gold Coast and he reckons there's an overall 16% reduction... he couldn't tell me any more though...
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

I thought the 2 available ratios for Jimny's were 4.1 and 4.3.

4.76 would be 16%.

Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Post by Squik »

Mmmmm-kay... was hoping I'd found a solution without too much dicking around.

Running 235s on Dilbert at the moment, bogging it down a bit, but tyres are too small to fix with trans' gearing...
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 92
Joined: Tue May 02, 2006 9:25 pm
Location: melbourne

Post by robsjimny »

I've heard yes. Lower ratios. I believe someone is trying to remove the electric transfer and put in the older manual type. It's meant to be lower ratios. Not sure where the gears are from. The auto or newer type3 vvt. Search jimny.se too

Rob
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

http://automobiles.suzuki.com.au/specs. ... mny_sierra

4.09 Manual, 4.3 auto, just like all jimny's, although apparently most auto jimny's run 4.09 too - the 4.3's are apparently very hard to find.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

ahh jimnys.......and the lack off ratios available.if you moved the steering to the front you might be able to bolt in a one litre housing stuffed with say some 4.6 lj gears, and use early vit 4.6 in the bum....never tried it....but have taken the measurements. the only thing is you wont be able to run a front locker......thats why i didn't go any further with it.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Top
Posts: 152
Joined: Thu Jul 05, 2007 9:21 pm
Location: Wollongong NSW

Post by gman79au »

The Series 1 (with g13bb) and Series 2 (with M13a) both run the same gear ratios. They were spec'd in sales Brouchures to come with 4.090 in autos and 3.9 in Manuals. But Every Manual Diff Ive seen has 4.090 ratios.

The New Series 3 Jimny has 4.3 ratios in Manual and 4.090 ratios in Auto's.
What does this mean? The first person to pull down and count the teeth on there New Jimny Manual and Auto's Can only tell us what Suzuki has install for us in the great Jimny Diff ratio Lucky dipp!

There are ratios avaliable from APIO for a small fortune if all else fails.
Top
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Post by Squik »

Looks like this needs a little more digging...

What are the ratios on offer at APIO? I can never find anythng on that site :roll:

I'm not keen to go bigger as far as rubber goes... I'm happy where things are with a 2+2 and 235s. I'm up at the Gold Coast at the moment and had a brilliant run up here in Dilbert... except for gale force crosswinds on the top of the mountains at the back of Byron' :shock: made for some interesting moments!
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 92
Joined: Tue May 02, 2006 9:25 pm
Location: melbourne

Post by robsjimny »

apio does a transfer gear too. low range only. 3.5:1 great on 30's but costly.


Rob
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

I think that you'll find that APIO's R&P's are no good for the local Jimny as I think they are made for a smaller 1.0 style diff used in the 660cc Jimny and they are over 6.1:1.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Wow 6.1:1... the gear teeth must look like a comb :?
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 70 guests