Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux front slipyolk extention

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 810
Joined: Thu Jul 15, 2004 8:02 am
Location: Somewhere in NSW

Hilux front slipyolk extention

Post by brighty »

Have looked in the bible but unable to find anything there that helps.

Can someone point me in the right direction of how/where to get info on extending the slipyoke on the front drive shaft??

Cheers
When in doubt..... UTE-ERIZE it!!!
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

Get a "custom" RHS one made or do it properly and go see a driveshaft shop and have a long slip made and balanced to suit.
Kind Regards,
Brad
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

http://www.locktup4x4.com.au/catalog/d3 ... ef8fe.aspx If you don't want to go a rhs one they'll get you sorted Rhs shafts are very strong had mine spinning on rocks on not a dama with it
plenty of parts on the bench
Top
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

Contact:
Contact LuxyBoy

Post by LuxyBoy »

Note the RHS and lockedup ones maybe noisy as they are not balanced.
Kind Regards,
Brad
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

LuxyBoy wrote:Note the RHS and lockedup ones maybe noisy as they are not balanced.
I would think the locktup ones would be fine. As long as they're aligned correctly when welded, they'd be fine. An SHS one on the other hand.....will be noisy as all hell! I know I've been using one for years! At least they don't fail and you can get plenty of slip out of them.
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests