Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Falcon springs in hilux arse end
Moderators: toaddog, Elmo, DUDELUX
Falcon springs in hilux arse end
Does anyone know of anyone that has put old falcon leafs into the old hilux's? i have heard that the XF era falcon rears will fit back end of a hilux if you move the mounts forward 150mm (i think), just throwing the idea out there as im looking at doin something like this.
cheers
Waz
cheers
Waz
Seen fairly often a few years ago... Falcon, Fairlane, ute, Explorer all similar length but differing centre pin location. They are all a few inches longer than IFS rear.
I have a set of reversed Ford Explorer springs in the back of my dual cab lux they flex OK but ride quite harsh. They have thick leafs but no military wrap spring.
I have a set of reversed Ford Explorer springs in the back of my dual cab lux they flex OK but ride quite harsh. They have thick leafs but no military wrap spring.
I had xd falcon rears in mine a while ago. you need to move the mount forward, and you also need to redrill the centre hole so the diff is in the same spot.
I actually had new main leaves made up, then just re-drilled the rest of them.
The xd uses more thinner leaves, opposed to the AU that has 3 thick leaves, so they are much easier to 'tune' for better ride.
You will aslo need to do a u-bolt flip, as these are 5mm wider springs. I just ground down the width of the eyes so they still fit the hilux mounts.
I actually had new main leaves made up, then just re-drilled the rest of them.
The xd uses more thinner leaves, opposed to the AU that has 3 thick leaves, so they are much easier to 'tune' for better ride.
You will aslo need to do a u-bolt flip, as these are 5mm wider springs. I just ground down the width of the eyes so they still fit the hilux mounts.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
these are the springs in the rear of my truck, im running them with 6"shackles, they flex pretty well and ride well on road. my mount is pushed forward to the middle of the rectangle inspection hole.
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Who is online
Users browsing this forum: No registered users and 0 guests