Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

94'80 series petrol/gas(wont rev!)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Sun May 11, 2008 3:33 pm
Location: Tuerong

94'80 series petrol/gas(wont rev!)

Post by AUGTREE »

G'day, I have made the mistake of washing my engine bay and now car will not rev over 2400rpm.(Only on petrol)Auto choke dosen't come on when cold, and i have reset the computer by pulling the EFI fuse and disconnecting the battery, With no sucess. It runs fine on gas but has a rough idle. I have also cleaned out the disy and spark plugs with WD 40 and air comp. Any Ideas or sugestions would be great. Thanx.
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

I'd try the compressed air again. Some cars are just a pain when they get wet. Blow out all the ends of your plug leads. If this still doesn't work I would start with connections on sensors.
Ben
Top
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

mate will be the throttle position sensor it will have water in it the same thing happened to me couple of years back
Top
Posts: 13
Joined: Sun May 11, 2008 3:33 pm
Location: Tuerong

Post by AUGTREE »

mate, i wish i had of asked a week ago. Little bit of water in the plug, could hardly see it. Bit of WD 40 and air and she's going like a dream. Thanx Mate.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 7 guests