Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ starter motor

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

GQ starter motor

Post by ROCKMUTT »

Hey guys i have a GQ shortie 4.2 diesel was running really good lately but the one day was out driving it and then came to start it again and it wouldnt crank over ,got all power and reds all fuses r intact just wouldnt crank over only making a clicking sound thats it ,and if u mess round with it turning the key on and off u can b lucky and it might start cranking then kik ionto life, so anyone know what could b up i thought might b the starter motor going but when this happened the first time and when we got it going again it was a few hours later and i noticed the clocked inside was like 3 or 4 hours behind like when u dis conect the battry then re connect it , but we never did that and we always had power there just no cranking..
any one know what may b the problem???????
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Posts: 845
Joined: Sun Nov 16, 2003 7:04 pm
Location: sydney , australia

Post by hotrod4x4 »

sounds like an interesting prob shane

but where'd u go driving?
an why wasnt i invited?
LOL

altho if it was xmas day , bugger that , was too bloody hot
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

okay, I had the same thing not 3 weeks ago. Had my GQ for about 6 weeks now (something like that). Surprisingly, it is the starter motor on its way out. SEQLD 4x4 sourced a benched tested 2nd hand one for me for about $300.00 or something. Apparently a new one can be about $1000... :shock: But the thing works a lot better now.
Heath & Melissa - 93 GQ LWB.
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

ah thnxs heath il get it checked out,

yea matt wasnt no where offroad :( was just driving round on the road and it stuffed up
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

same same

Post by mav »

same thing happened to my td42 it was the contacts in the solenoid (sealed unit) a new solenoid cost me $50 (rang around the local auto lecs for the best price)
see ya mav
Posts: 593
Joined: Sat Nov 09, 2002 8:06 pm
Location: Traralgon Vic Aust.

Post by DAZZ »

Yep get it irebuilt. Quick and easy job. Better then a second hand one. you get warentee and you know what you have...
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

DAZZ wrote:Yep get it irebuilt. Quick and easy job. Better then a second hand one. you get warentee and you know what you have...


Mine was unrepairable. That's why we got a second hand one.
Heath & Melissa - 93 GQ LWB.
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Had this on mine also (TD42), mine was rebuildable. The solonoids where on the way out and the throw out bearing (thing with gear on it) was dry so they pulled it apart greased her up been good since.
As for the clock dunno, but mine works every now and then, and it still shows roughly the right time. So mine must have a loose accesories wire, and the memory wire is good.

Turps
starts but prick of a clock.
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

standard

Post by mav »

i think the clock thing is common mine does it havent worked out how to fix it yet .
see ya mav
Posts: 146
Joined: Wed Nov 13, 2002 2:43 pm
Location: outside the migration zone

Post by Snatchy »

Clock is an easy one. Someone posted some stuff on the Patrol list a while back on how to fix it (just giving credit where its due).
The common problem just doesn't display the time but does keep the correct time. (ie not related to the problem associated with the first post of this thread i think)
Fix:
Pull out clock and Re solder the connections on the circiut board to the resistor. A hotdog shaped thing which on my patrols are blue with a stripe. On the bottom of the circuit board roughly. Need a pic to show it..... :?
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

Hey thnxs guys for ur info i finally got round to getting my truck in to b fix and yes it was the bloody solenoid was totaly farked all corroided and rust from all the water and mud shit its been in , so now she got a brand new solenoid and shes never started better :)
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

cost

Post by mav »

what did it end up costing???
see ya mav
Posts: 293
Joined: Wed Oct 29, 2003 5:32 pm
Location: sydney (penrith)

Post by ROCKMUTT »

ended up being $253 buks new solenoid and he pulled down my starter and cleans it all up
94 GQ ST LWB TD42 ,DTS turbo,3 inch exhaust,snorkel,dual batts,3 inch lift,30mm coil spacers,Warn 9000,ARB bar,33x12.5x15 MTz's on black sunnys
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest