Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Trail Gear 6.5's or S4?
Trail Gear 6.5's or S4?
Hi im about to buy some gears in the next few weeks and what i want to know is what other people think of their gears and which you think is better.
I know that the trail gears have unlimited warranty whereas S4 only have 2 years.
Thanks Mitch
I know that the trail gears have unlimited warranty whereas S4 only have 2 years.
Thanks Mitch
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
There's your answer! I am about to buy the TG 6.5's from lowrangeoffroad. With the AU dollar the way it is, it works out at roughly $650AU for the gears, a rebuild kit and new output shaft pilot bearing - delivered to my door!I know that the trail gears have unlimited warranty whereas S4 only have 2 years.
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Oh and another thing, what do i need to get when i order them?
Do i buy the rebuild kit or just buy the bearings seperately and silicone the case together?
And is it advisable to buy the HD front output or just wait and see how it holds up?
Anything else i've missed?
Mitch
Do i buy the rebuild kit or just buy the bearings seperately and silicone the case together?
And is it advisable to buy the HD front output or just wait and see how it holds up?
Anything else i've missed?
Mitch
1989 LN106- 2" spring lift, 285 mt117's, 4.8's, front spartan high pinion'd, 6000k H/L HID
The "Gear Install Supplement Kit ($115USD)" that I mentioned is the correct kit IF you are buying the 6.5 gears, and if you wish to do a FULL rebuild of your case without 'doubling up' on any parts. It is up to you if you wish to do a full rebuild on your case or not.
cj - the "couple of extra bits" is exactly what this kit is... Sean from Lowrangeoffroad confirmed this for me today.
I choose to do a FULL rebuild of my transfer while it is apart - so I got the kit.
If you don't want to do a FULL rebuild of your transfer then that's fine too - Suit yourself!
Pez
cj - the "couple of extra bits" is exactly what this kit is... Sean from Lowrangeoffroad confirmed this for me today.
I choose to do a FULL rebuild of my transfer while it is apart - so I got the kit.
If you don't want to do a FULL rebuild of your transfer then that's fine too - Suit yourself!
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
don't forget to strengthen the case though once you fit the gears!!! I found out the hard way, and smashed the new gears and housing :(
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
While we are on the topic (sorry for hijack ) what is the general consensus on strengthening? For those on a slight budget, are transfer rings the go or not? If so, where is the best place to get one? (I did a quick search but did not find much relevant info on this.)get it up there wrote: don't forget to strengthen the case though once you fit the gears!!! I found out the hard way, and smashed the new gears and housing :(
Cheers all,
Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
The rings are good, PM roktoy (Chris) as he makes them. Also beef up the arms as these will bend.Pezooki wrote:While we are on the topic (sorry for hijack ) what is the general consensus on strengthening? For those on a slight budget, are transfer rings the go or not? If so, where is the best place to get one? (I did a quick search but did not find much relevant info on this.)get it up there wrote: don't forget to strengthen the case though once you fit the gears!!! I found out the hard way, and smashed the new gears and housing :(
Cheers all,
Pez
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
dont know if anyone has found this yet but S4 gears on Ebay
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=011
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :IT&ih=011
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
Who is online
Users browsing this forum: No registered users and 0 guests