Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux stuck in 4WD

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4
Joined: Mon Dec 09, 2002 9:20 am
Location: Sydney

Hilux stuck in 4WD

Post by stealth »

Hi Guys,

New to the forums, so please be kind :)

I have a 91 Hilux and it is stuck in 4wd and I cannot get it out.

I was at the lights yesterday and I pressed the 4wd button on the lever, the 4WD light came on and the car went into High.

I switched off the button, but the light still stays on and 4WD is still engaged.

I have tried moving it into 4 low and disengaging the button, putting in reverse and trying to disengage but no luck.

Anyone else had this problem or know how to resolve the problem?

Any help greatly appreciated!
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

SAS?
Always late in a 2.8
Posts: 4
Joined: Mon Dec 09, 2002 9:20 am
Location: Sydney

Post by stealth »

Hi Maddog,

Sorry for my ignorance, but what is SAS?
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

;)
Always late in a 2.8
Posts: 145
Joined: Fri Jan 10, 2003 8:34 pm
Location: Ringwood, Melbourne

Post by Maddog »

If you pulled the fuse for your dash lights, it would turn off.

Is it still in 4wd or is it just the light?
Always late in a 2.8
Posts: 4
Joined: Mon Dec 09, 2002 9:20 am
Location: Sydney

Post by stealth »

When I take the fuse, out the light on the dash goes out but the car is still stuck in 4WD.

Any ideas?
User avatar
POS
Posts: 4318
Joined: Tue Oct 22, 2002 8:52 pm
Location: Perth

Post by POS »

How do you know that its still in 4WD????

If it is still in 4wd and not just a faulty conection with the dash light then it is most likely a problem with the ADD actuator assembly!!!

There could be a number of factors but the most likely is its either the ADD RELAY, a damaged vacuum line or a faulty actuator!!!!

They can be a easy fix, but its quite hard to explain!!

To check the vacuum lines have a look under the bonnet, you will see the big black fuse box, near there you will see a bank od solinoids. There will be three hoses. Each will have a different colour band on them.

Blue band will have vacuum when 4wd is engaged
Pink band should have vacuum when 4wd disenged
White band vacuum supply hose!

It could be that anyone of these have come off or broken.

You will need to follow them and make sure they are connected!
The blue and pink bands will run down to the front diff, as for the white one you will just need to follow it around as where they go to changes between models!

If all the vacuum lines are intact then it will be either a relay or the actuator itself.

If this is relay or actuator and you may be better of buying a workshop manual or even a Gregorys manual (these are quite good) and you should be able to fix or troubleshoot any problems!!
Posts: 4
Joined: Mon Dec 09, 2002 9:20 am
Location: Sydney

Post by stealth »

Hi Guys,

Thanx for the help. I bought a Gregorys workshop manual and we traced it to the 4wd motor that sits on the back of the gearbox, where the tailshaft connects. We unplugged the main lead from the engine bay to it. This has solved the problem.

From what the Gregory's says, we think that it is the ADD Relay.

Once again thanx for all your help! :)
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests