Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel services

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Diesel services

Post by Canyonero 4x4 »

I'm probably double posting but I couldn't find anything.

What should my 5000km services involve. I do 5000kms pretty quick (a bit less than 2 months) so I'd like to know I'm doing everything right.
At 5000 I drop the oil, check coolant, brake fluid, washer bottle
At 10000 I do the above and change the oil and fuel filters and give the air filter a bit of a bang if it's a little dusty.
What else should I be doing?
What are the important things?
Dave
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Diesel services

Post by bogged »

from new? Lots more than just if its every 5000klms....

On what 4wd?

Wheel bearings, cvs, drive shafts, fuel/air/oil filters,
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Oil and filter and grease the uni's every 5k, fuel filters every 10k on the diesel, air filter whenever its dirty, brake/clutch fluid and coolant every 40k/2 years, gear oils every 50-60k, power steering fluid when it starts going black and smelling burnt, repack your wheel bearings ( i think toyota recommend every 20k but normally they can do a bit longer if you aren't too bad roads etc)check your brakes, light etc.
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Re: Diesel services

Post by Canyonero 4x4 »

bogged wrote:from new? Lots more than just if its every 5000klms....

On what 4wd?

Wheel bearings, cvs, drive shafts, fuel/air/oil filters,
No not new, its a 1990 Troopy with a 1HZ

I'm a n00b so make it clear.
Dave
Posts: 4
Joined: Sun Mar 11, 2007 6:06 pm
Location: Sydney

Post by truK »

it would def be a good investment to pick up one of the workshop manuals (gregories or similar) for your vehicle. they are about $50 and tell you what needs to be done when and how to do it.
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Post by Canyonero 4x4 »

I got a gregory's for it the day I bought the thing.
Was just wondering what's an overkill and what should maybe be done earlier.
So what is the main reason for doing it 5000 instead of 10000? Is it just
because it's so expensive for a rebuild?
I'm not arguing the fact, but simply trying to understand diesels a bit more...
Dave
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Canyonero 4x4 wrote:I got a gregory's for it the day I bought the thing.
Was just wondering what's an overkill and what should maybe be done earlier.
So what is the main reason for doing it 5000 instead of 10000? Is it just
because it's so expensive for a rebuild?
I'm not arguing the fact, but simply trying to understand diesels a bit more...
its because the oil gets dirtier much quicker in a diesel engine, especially older indirect injected engines.
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

Canyonero 4x4 wrote:I got a gregory's for it the day I bought the thing.
Was just wondering what's an overkill and what should maybe be done earlier.
So what is the main reason for doing it 5000 instead of 10000? Is it just
because it's so expensive for a rebuild?
I'm not arguing the fact, but simply trying to understand diesels a bit more...

i do all of our cars every 5000km regardless. (oil and filter)
thats my patrol, our AU falcon, dads BF ute and mums camry(now a mazda3 petrol ) my brothers rodeo and my sisters mazda3 TD

oil and filters are cheap, engines are not.
http://www.mothfukle-engineering.com/
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Post by Canyonero 4x4 »

Uh-huh. Thanks lads.
Dave
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests