Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

suspension bushes

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 156
Joined: Wed Feb 20, 2008 12:02 am
Location: Gold Coast

suspension bushes

Post by esp22 »

When changing suspension bushes, does the whole wheel have to come off or can you just jack the car off the ground?Any other advice or tips for when changing bushes?


Thanks have a good one
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Shouldn't have to take the wheel off if your just doing shackle bushes. Support the vehicle on the chassis too. When re installing grease the inner part of the bush, not so much the outer.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Also make sure th eye and fixed pin are clean and free of any old rubber and/or sharp bits it'll just cut the bush up if it isn't.
plenty of parts on the bench
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests