Went to Autobarn and Burson's thinking they might be able to help me with a heater hose adaptor - a fitting to hook 3/4" heater hose up to 5/8" heater hose. I have one such adaptor, an old one, in my hand right now but it's pretty corroded... so I know they exist.
Anyway... no dice at Burson's. At Autobarn the parts guy got out a box of assorted adaptors which were all made of plastic. I'm more of a metal sort of person for this kind of stuff.
But... I notice there's a lot of plastic on modern cooling systems including radiator tanks and heater taps. So maybe plastic is okay. The fittings the Autobarn guy had were 100% indistinguishable from your garden variety garden hose fittings for watering systems. Maybe a different plastic but looking at them, I doubt it.
So, would you be comfortable using plastic fittings in this application?
I hesitated!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Plastic fittings for heater hose
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Plastic fittings for heater hose
This is not legal advice.
WEe had to replace such a fitting in the Landy, landy didn't have one in the country and was exhorbitantly priced anyway.
Try Purple Pig near where Mountain Hwy intersects Stud Rd. I got the part required from them. A chemical and heat resistant plastic tee and a series of hose barbs that screwed in to the tee to accept my hoses.
They are cheap enough so you could carry a spare just in case.
Also try a good bearing supplier, there's one on Barry St bayswater that had brass versions of what I needed but not quite in large sizes.
I don't like plastic hose fittings, the one on the Landy was perished to the point where I could snap it apart with my fingers, age and constant heat had embrittled. What was scary was when the Landy place told me the thermostat housing was also made of the same plastic and there were none on the country
Cheers
Try Purple Pig near where Mountain Hwy intersects Stud Rd. I got the part required from them. A chemical and heat resistant plastic tee and a series of hose barbs that screwed in to the tee to accept my hoses.
They are cheap enough so you could carry a spare just in case.
Also try a good bearing supplier, there's one on Barry St bayswater that had brass versions of what I needed but not quite in large sizes.
I don't like plastic hose fittings, the one on the Landy was perished to the point where I could snap it apart with my fingers, age and constant heat had embrittled. What was scary was when the Landy place told me the thermostat housing was also made of the same plastic and there were none on the country
Cheers
Yes... I just remembered I had a plastic fitting die on the small gravel road off the big gravel road going from King's Canyon back to Alice Springs, it was a tee-piece added for the LPG system. Replaced it with a brass one when I cobbled it all back together and got to Alice Springs.
Bit of a crappy place to have a piece of plastic fail. But it was probably at least ten years old, so it is not like it failed overnight.
Good thinking, I'll try purple pig. At least if they tell me it's the right kind of plastic I'll be able to believe them.
Bit of a crappy place to have a piece of plastic fail. But it was probably at least ten years old, so it is not like it failed overnight.
Good thinking, I'll try purple pig. At least if they tell me it's the right kind of plastic I'll be able to believe them.
This is not legal advice.
Just buy a couple of brass barb fittings (one male, one female) and screw them together. Only a few $ each.
You can get them from anywhere that sells compressors/tools to tradies. May need to go to pirtek or enzed for larger sizes though. But even pirtek are cheap for these parts.
edit:
Pirtek/enzed call them "hose tails" though - just to be different.
You can get them from anywhere that sells compressors/tools to tradies. May need to go to pirtek or enzed for larger sizes though. But even pirtek are cheap for these parts.
edit:
Pirtek/enzed call them "hose tails" though - just to be different.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 3 guests