Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
r151 g/box to 4.5 1fz-fe need to know
Moderators: toaddog, Elmo, DUDELUX
r151 g/box to 4.5 1fz-fe need to know
need to know if an R151 g/box from a 3f will bolt to a 4.5 1fz-fe cheers
Re: r151 g/box to 4.5 1fz-fe need to know
3F never came with R151icrawl wrote:need to know if an R151 g/box from a 3f will bolt to a 4.5 1fz-fe cheers
Free air locker to the first 20 callers!
The gear box will bolt up to the 1FZ bell housing but the 1FZ/1HDT box has a 14 spline input shaft to suit the larger 300mm (12') clutch (3F is 275mm(11') 10 spline ) The later boxes also have the twin syncro's on 1st and 2nd gears as the early boxes were knochy so they made the mod to make them shift better.
Wally
Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Who is online
Users browsing this forum: No registered users and 66 guests