Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sd33td what turbo to use as a replacement

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 78
Joined: Sat Jun 30, 2007 10:47 pm
Location: launceston tas

sd33td what turbo to use as a replacement

Post by taspatrol »

well there is a whole world of oil leaking out of my turbo(i would say seals are gone) and i was just wondering what turbo people have used for an upgrade i am looking for some more power.
i was thinking the t25 but a bit worried it might be a little laggy

i am running a top mount inter cooler and 3 inch from the turbo back exhaust

running35s and looking at running around 12-15 psi boost any tips or ideas would be grateful
cheers justin
Posts: 247
Joined: Wed Apr 19, 2006 9:13 pm
Location: Perth

Post by 84mksd33t »

Are you sure that one of the oil hoses has not split and is spewing oil everywhere? Quite common that the hoses fray.

Can I see some pics of your setup and rig?

I have an 85 SD33T SWB on 35's with a front mount and 15psi boost. Needs a big tune up though. Here's a pic:
Image
Image
Posts: 2
Joined: Thu Jul 10, 2008 7:11 pm
Location: Sunny Coast

Post by dattopimp1 »

Do you have the standard turbo on yours 84mksd? I'm about to do the same thing. Got a turbo sd33 engine without a turbo. Was gonna chuck a turbo off a 4.2 on it for some better go. Lookin at doin a few mods engine wise though. Lookin at the 12-14psi mark with a top mount
Posts: 247
Joined: Wed Apr 19, 2006 9:13 pm
Location: Perth

Post by 84mksd33t »

hey dattopimp,

i run a stock sd33t with stock turbo, front mount intercooler, shit loads of fuel, 14psi boost (around 12psi boost by 1800rpm)
Posts: 59
Joined: Sat Jul 30, 2005 7:00 pm
Location: wollongong nsw

Post by nick bj40 »

yep ive been told these turbos are a pretty good fit and can(but be carful sd do crack) be wound up a good bit
82 MQ SD33T, 5 speed, 4.6 diffs, 50mm spring, 40mm body, front extened 50mm, 35' trapdors (awsum) just lovin getin out there
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

Ok so anyone got the A/R for the inlet and exhuast housings? I've been lookin everywhere but havn't been able to find actual figures. Or know what size their close to? Could end up goin a sd33 turbo if i can get away with it, just thought they'd run outta puff abit higher up after 3,000
MK Patrol SWB, Lift, lockers, ATZs or Simex ETs, winch and custom bar, Snorkel, daily, abused.
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

mines still stock psi. it runs outta puff about 3400-3600 rpm in 5th gear. with 35's its till pretty much the same just alot quicker :twisted:
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests