Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WANT A COMP GQ OR GU PLEASE HELP NEWBIE HERE

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

WANT A COMP GQ OR GU PLEASE HELP NEWBIE HERE

Post by MAFOSIA »

Folks

My first post here so be gentle :) I have been participating as a expectator in almost all the competions. And the love for GQ or GU has grown in me,

Can some one help me make decission. I want a Diesel rig bec i love the sound of the diesel engine with turbos and going under water with ease and using the torque.

Now should i go looking a used already done comp truck or go and build one slowly?

If i build what kind of suspension is the best. what to look for etc etc

Currently I running a jeep wrangler JK long wheel with 4" lift locked front and rear 35" MTZ arb bull bar and low reduction 4.88 gears etc etc
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: WANT A COMP GQ OR GU PLEASE HELP NEWBIE HERE

Post by bogged »

wat sort of competition?
what budget?
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

Re: WANT A COMP GQ OR GU PLEASE HELP NEWBIE HERE

Post by MAFOSIA »

Not straight away in the comps but soon like tough truck comp/ateco/outback/extreme winch challenge etc budget not sure yet have to see whats available in the market first
bogged wrote:wat sort of competition?
what budget?
Posts: 477
Joined: Mon Mar 21, 2005 3:49 pm
Location: here

Post by DanielS »

I think the best option is to buy a cheap rig in reasonable nic, because you will chop at it and fit custom engine bits.

I brought a 26 grand ute with a turbo kit and cut it to bits.....
:cry: :cry:
JUST my little bit.

Daniels
V8s are nice, but you cant beat the sound of a turbo working the magic on a juiced up diesel.
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Your about a month too late to buy my mates GQ comp ute for $25000, full roll cage, tube tray sliders and whinch bar, injected holden 5L, superior engineering suspension, beadlocked 35" pedes, custom high mount whinch, front and rear ARB lockers etc etc. That should let you know what kinda prices they can go for.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 453
Joined: Sun Dec 02, 2007 7:37 pm
Location: Brisbane

Post by SuperiorEngineering »

If money and time is no object than purchase a standad truck and build it from scratch the way you want it but chances are if you haven't owned a comp truck you wont know what you want or need.
The better choice IMO is purchase a pre built proven comp truck , you just have to be at the right place at the right time.
To be competitive in speed events you will easily spend 50K upwards for a new truck but prob half that for a pre owned comp truck.
+++++NOW ON FACEBOOK++++++
www.superiorengineering.com.au
Largest 4x4 online superstore
SPONSOR OF TOUGH TRACKS
DGR RACE TEAM
JOOMBIE RACING
AMADA XTREME RACE TEAM
MAYBELINE RACING
MMM RACING
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

Post by MAFOSIA »

I think i will go with an option of a pre built comp truck and modify further if required. You are correct at this stage i dont know what to look for....i wnat you guys professional advise
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

My GQ LWB is for sale.
50mm Bodylift new body mounts
Gaurd chop Clears 37's
3 inch Suspension New Ridepro Shocks.
Carby Mods,
ignition mods.
Heavy duty trailing arms.
Lots of spares, panels, engine, carby, dissy etc

In Melbourne loking for around $3K. Rego no RWC

Good start if you want to build one your self
:rofl: :popcorn: :snipersmile:
Posts: 41
Joined: Wed Oct 31, 2007 10:30 pm
Location: Townsville

Post by jaybags »

I went down this road and in the end i wish i just bought one built already. Then you can add your little touches as you go along. The money and time you will spend is just plain crazy and even worse if you cant do most of the work yourself. Just buy one that has been raced.
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

Post by MAFOSIA »

Love to buy one pre built but i am afraid of being thrashed really hard. I know about jeeps a lot but when it comes to nissans comp trucks my knowedlge is zero.
I guess i will be looking for more help on identifying a comp truck and go from there
jaybags wrote:I went down this road and in the end i wish i just bought one built already. Then you can add your little touches as you go along. The money and time you will spend is just plain crazy and even worse if you cant do most of the work yourself. Just buy one that has been raced.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

no matter what you do it will be a 15 year old car sort of thing. so an abused comp truck is just a few welds and plates away from being a non abused road driven car. MOST comp cars are looked after between rounds too where alot of normal cars are just serviced whenever they remember.
turbos are nice but i'd rather be blown
Posts: 114
Joined: Mon Apr 28, 2008 3:39 pm
Location: Vic

Post by whitemav »

Keep your eye out for a well built GQ mate.
Unless you own a 4wd workshop, building one from scratch will cost a fortune and take endless hours.
Some nice ones come up from time to time, but mostly from up north.


PS, once you find it and need a navvie. You know were to find me :D

Cheers Chris
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

Post by MAFOSIA »

Thanks Mate

Keep an eye for me on a good stromg gq truck and yes need a navvie too
whitemav wrote:Keep your eye out for a well built GQ mate.
Unless you own a 4wd workshop, building one from scratch will cost a fortune and take endless hours.
Some nice ones come up from time to time, but mostly from up north.


PS, once you find it and need a navvie. You know were to find me :D

Cheers Chris
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

whitemav wrote:Keep your eye out for a well built GQ mate.
Unless you own a 4wd workshop, building one from scratch will cost a fortune and take endless hours.
Some nice ones come up from time to time, but mostly from up north.


PS, once you find it and need a navvie. You know were to find me :D

Cheers Chris
Even with a shop will cost a fortune.
:rofl: :popcorn: :snipersmile:
Posts: 240
Joined: Sat Mar 20, 2004 6:38 pm
Location: far east gippsland

Post by johno »

Youve got me stumped mate, you asked for photos of the tray body ive got coming but ive asked you twice for you email address and to let me know if your out of the game or want them sent.

Johno
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

If your gunna do it yourself i'd start with a gq. give it a 6-7 lift, front and rear diff locks, some decent rubber and the best winch you can afford... This would be enough to get you started and you can learn from there.
Buying a second hand rig may be easier but building thems more fun..
01 td42 GU patrol ute, with extra bits and pieces.
[quote="Bluefreak"][quote="ofr57"]flex is over rated :finger:[/quote]

You drive an IFS too, huh...???

:D[/quote]
Posts: 555
Joined: Fri Aug 03, 2007 11:10 pm
Location: port melbourne,vic

Post by flexytj »

comp your jeep
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Post by GUJohnno »

Some thing like this would be a great start.
http://www.outerlimits4x4.com/ftopic146285.php

Nissan GQ ST Coil Cab 93
ITEM:
4.2 Turbo Diesel
Top mount intercooler & GU bonnet scoop
Sarfari snorkel
Turbo Timer
GU front and rear diffs 4.6 ratio
GU steering box
35" mud tyres
3" Exhaust
120mm extended cab
ARB front bar
warn winch high mount
2 x 60litre water tanks under tray
3 x fuel tanks 1 x STD 1 x 90 & 1 x 120
steel tray
tow bar
second battery under tray with 2 x engle power oulets on head board and battery isolator
UHF
3" suspension lift (new)
2 x large box's that bolt on tray for long distance travel
roof style basket above tray

CONDITION:
Good Condition

PRICE AND PRICE CONDITIONS:
$16,000.00
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

that is perfect for a start i recon. GU diffs and all
turbos are nice but i'd rather be blown
Posts: 474
Joined: Thu Apr 24, 2008 7:31 pm
Location: Canberra

Post by A.J. »

Yeah, pretty good price too, if the modding is done properly.

I just saw it has no lockers, well you gotta dish out for them still or you might drive it without lockers first but not much good in a comp I guess :?
Posts: 10
Joined: Fri May 16, 2008 8:15 pm
Location: NORWEST SYDNEY

Post by GEEKEW »

i can vouch for the rig in gu johno`s post ` , i went and looked at it , he gave me a drive
and its a great start for a comp truck, i loved it and wanted it but the missus wants soemthing more standard as she woulda been driving it every day , it goes pretty hard an steers good for something lifted with 35`s on it,
i say buy it lock it front and rear bit of bar work and go out and get dirty
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

just steal one..... seems to work in newcastle..
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 10
Joined: Wed Nov 14, 2007 9:16 am
Location: Melbourne

Post by MAFOSIA »

Few Questions

Can i install 37 Simex
Is it hard and expensive to shop off and put a heavy duty tray
GU diifs are stronger but how much extra to laminate chromoly axles etc
4.2 TD how good and to recondition how much effort and dollars

thanks
Z
GUJohnno wrote:Some thing like this would be a great start.
http://www.outerlimits4x4.com/ftopic146285.php

Nissan GQ ST Coil Cab 93
ITEM:
4.2 Turbo Diesel
Top mount intercooler & GU bonnet scoop
Sarfari snorkel
Turbo Timer
GU front and rear diffs 4.6 ratio
GU steering box
35" mud tyres
3" Exhaust
120mm extended cab
ARB front bar
warn winch high mount
2 x 60litre water tanks under tray
3 x fuel tanks 1 x STD 1 x 90 & 1 x 120
steel tray
tow bar
second battery under tray with 2 x engle power oulets on head board and battery isolator
UHF
3" suspension lift (new)
2 x large box's that bolt on tray for long distance travel
roof style basket above tray

CONDITION:
Good Condition

PRICE AND PRICE CONDITIONS:
$16,000.00
Posts: 257
Joined: Wed Sep 07, 2005 8:22 pm
Location: melbourne

Post by mikesmith »

there are no such thing as 37 simex they only go to 36".

the turbo diesel 4.2 is a pretty bullet proof motor. it will take a massive gulp of water or something to break it. they seem to last forever.

if it does need rebuilding unless u are good on the tools u will have to pay someone to do it. not a massive job but will take at least $5000 out of your pocket i am pretty sure, depends on how bad it is.

laminating the axles does not cost all that much superior do kits for you to weld on i am pretty sure, either way the diffs are most likely going to have to come out and be stripped to be welded to.

the chromoly axles are and cv's are about $1300 i think.
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Post Reply

Who is online

Users browsing this forum: No registered users and 169 guests