Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Recentering Wheels with Suzuki Centres

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Recentering Wheels with Suzuki Centres

Post by greg »

Hi All,

I had a chat recently with Rod (Rodified) about running wide tyres and rims on a suzuki.

Once outcome of this discussion with the idea that it was cheaper to buy / source a set of wide rims for a 6 stud patern (i.e. toyota / nissan), cut out the centres, and drop in some 5 stud centres. The end result being something like a 15x10 5 on 5.5's for much less than the cost of buying them new.

It is also far more common to find 6 stud wheels attached to big tyres in the trading post, then it is to find them 5 stud wheels.

Has anyone done this? If so, I'd like to hear what rim types you used. (i.e. Speedies, ROH Track II's). And if you were able to use the centres out of a stock sierra rim - because obviously everyone already has these and they are basically free if you don't.

Thanks,
Greg
DMA Founding Member #1 - Now Retired
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Good idea 7 & 8 inch sunnies for toy/nissan are pretty easy to find, and as you said stock zook rims are basically free.

Why didn't i think of this before? :D :finger:
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.


I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.

Greg, I reckon its doable, Anthony got the centres machined out of his sunrasias and re-welded for more off set for about $35-40. That said taking an ROH centre from a zook 15X7 and putting it in a TOY 15X10 should be perfect.

As far as zook I know somebody getting rid of Zook Trak II's ;) ;)
yeshemesh
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

the rims on Chris' LWB are actually Lada Niva rims with Sierra centres. It was the only way I could get a 6" rim with the 16" centre for the SATs at the time. I don't see why it would n't work. As you said you can pick up cheap rims for Nissans/Toyotas and it is an easy matter to cut the centre out and reweld a new Sierra centre
Ransom note = demand + collage
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:
GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.


I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.


Bingo big steve... you are right on the money there.
DMA Founding Member #1 - Now Retired
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Damo wrote:Why didn't i think of this before? :D :finger:


Because you've only been looking at pretty chrome bling wheels? :roll:
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:
bigsteve wrote:
GaryInOz wrote:New ROH 5 on 5.5" 15x7s F100 whitespokes with a +7mm offset run to about $80 each from TTF. They are a heavier guage metal than the 7" Zook rims and would stand up better to the shit that you guys hurl at them. Seems to me that you could save yourself the stuffing around trying to get part A fitted to part B after removing part C and then not being sure if they are roadworthy. Probably cost about the same, too.


I think what gregs trying to say is you dont see too many 15X10 sunrasia's in 5 stud, but they are usually fitted to wide tyres when they are for sale.


Bingo big steve... you are right on the money there.


You could fit your Boggers on my 15X8's
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:You could fit your Boggers on my 15X8's


33x14's or 35x14's both require a 15x10s. :cool: and probably a lot of broken axel / steering componentry :cry:
DMA Founding Member #1 - Now Retired
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

go 38.5x11 then :D
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Nah... no point running boggers unless you are running wide boggers :cool:
DMA Founding Member #1 - Now Retired
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

you need to get some bigger hamsters then :D
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:Nah... no point running boggers unless you are running wide boggers :cool:


Your just getting withdrawels from when your zook was PHAT
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

when exactly did my car lose PHAT status? :? :cry:
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

greg wrote:when exactly did my car lose PHAT status? :? :cry:


When you took my tyres off it and stopped mall cruising :)
yeshemesh
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

bigsteve wrote:
greg wrote:when exactly did my car lose PHAT status? :? :cry:


When you took my tyres off it and stopped mall cruising :)


hahaha - now i remember... actually i took my 'farty' car out for a spin lastnight and my new neighbours (who have obviously never seen my car running before since it has been a while since the last trip) got the surprise of their lives when i came screaming up the driveway under full noise with sneazes :D
DMA Founding Member #1 - Now Retired
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

I'll bet your car (Regardless of the PHATtedness) fits right in where you live ;)
yeshemesh
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests