Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cv question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 124
Joined: Fri Aug 17, 2007 11:48 am
Location: lonnie

Cv question

Post by FC3892 »

Hey all,
Question bout Cv's, brother has a worked 2ltr in the zuki we just built... all that power and welded front, mixed with new 33's = no drive to one wheel. Im thinking some more ppl have stuffed them to! how much do u guys pay new and or second hand ones? we are in tas and being told about 500 for a new one :shock: looking for a second hand one now.

Adam
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

2nd hand they're worth about $150 each if you can find them

You're just going to keep doing them though unless you A) stay well off the throttle and B) upgrade to 26 spline CrMo axles.

$500 new is about right.

Remember, ALWAYS remove the CV as soon as it breaks. They have a nasty habit of jamming up the steering if you drive on them when they're broken.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Gwagensteve wrote:2nd hand they're worth about $150 each if you can find them

You're just going to keep doing them though unless you A) stay well off the throttle and B) upgrade to 26 spline CrMo axles.

$500 new is about right.

Remember, ALWAYS remove the CV as soon as it breaks. They have a nasty habit of jamming up the steering if you drive on them when they're broken.

Steve.
Steve what have you been paying for the CrMo units ? is it compareable to the new price of a stocker ?
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

They range between US$500 and US$700 a pair.

Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 124
Joined: Fri Aug 17, 2007 11:48 am
Location: lonnie

Post by FC3892 »

yeh it will happen again, might have to look into some stronger ones for the long run. or a diff swap lol...
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Gwagensteve wrote:They range between US$500 and US$700 a pair.

Steve
So new OEM vs CrMo is very reasonable. I have purchased whole suzuki's for less than $500.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Calmini axles seem to be a cheap go between stock and full blown chromo ones. Check them out if you are on a tight budget. But with a worked 2 litre and welded diff on 33's I'd be going the ducks nuts of axles.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

GRPABT1 wrote:Calmini axles seem to be a cheap go between stock and full blown chromo ones. Check them out if you are on a tight budget. But with a worked 2 litre and welded diff on 33's I'd be going the ducks nuts of axles.
But then you still need to upgrade the cv's. Cheapest way is birfield cups and they are $50 a pop, add that to $140 a side for calmini axles and that will get you up over $400 by the time you get them here. May as well go for chromo axles and cv's then.
Posts: 124
Joined: Fri Aug 17, 2007 11:48 am
Location: lonnie

Post by FC3892 »

well stock one didn't last long again lol.... can anyone send me a link for a site that is selling some tuffer Cv's? no one is Tas can really help

Thanks Adam
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

All the gear, No idea...
Posts: 124
Joined: Fri Aug 17, 2007 11:48 am
Location: lonnie

Post by FC3892 »

on to it thanks!

Adam
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

width and strength in std form
ImageImage
Image
michael
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests