Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lt230 or viscus tranfer?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

lt230 or viscus tranfer?

Post by matt_w »

i currently have a blown lt230 (blew yesterday)

i have a spare viscus tranfer if worth putting in, or should i get the lt230 rebuilt?

is it true the drive shafts are different lenghts between the 2 transfers?
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

From what i understand, yes.
Get another LT230 or rebuild yours. Viscous is the pits.
rick@offroadmediagroup.com.au
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I thought that viscous also dropped the shafts to the opposite side compared to the LT230.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

Post by matt_w »

would i be able to drop the viscuc in for the time being and drive it front wheel drive? just while i would get the lt230 rebuilt?

im planning on pulling out my blown transfr this weekend
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

I dont think they can be interchanged at all.

They propshafts are on the wrong sides to each other and so wont connect to the diffs, and internally they are completely different.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 56
Joined: Mon Jan 10, 2005 8:33 am
Location: Bentleigh VIC

Post by cpmurray »

Slunnie wrote:I dont think they can be interchanged at all.

They propshafts are on the wrong sides to each other and so wont connect to the diffs, and internally they are completely different.
It depends on if the transfer case is for a P38a or a classic. If it's for a classic, then the only problem might be the length of the prop shafts.
Craig Murray
1951 Land Rover 80"
1984 Land Rover 90 V8 (The Yellow Peril)
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

You can fit the BW viscous coupling transfer for the time being, the front shaft will be too short off your LT230 though.

If you just want to drive it around in nrear wheel drive it'l be okay.

Trav
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

I have a LT 230 for sale well I been meaning to sell it rebuilt at 90000k (new bearings etc) when i bought it done 55000k since i had it well looked after drop me a PM if you are interested make me an offer.

Mick
TD5 96 Discovery UTE.
Top
Posts: 149
Joined: Sun Feb 23, 2003 8:41 pm
Location: nsw

Post by matt_w »

hey Mick did you get my PM?
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

yeah i did sorry just started new job haven't had time to scratch myself will PM you back today
TD5 96 Discovery UTE.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 33 guests