My engine mounts are slighty cracked and the mechanic who is doing the roadworthy wants em changed.
I had a look and i know that the passenger side one is a commo V6 unit but am i right in thinking that the driver side one is a standard toyota unit.
It looks like it is but not 100% sure.
If someone could tell me what types of mounts are used for this conversion it would be appreciated.
thanks again.
nibbsy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux v6 conversion engine mounts
Moderators: toaddog, Elmo, DUDELUX
hilux v6 conversion engine mounts
Put some spark in your life.........Sleep with an electrician
Was looking at one a while ago and it looked like it was set up this way I'd say your on the right track it's probaly ony the commo one thats craked here common as all hell.
Last edited by Sic Lux on Mon Jul 21, 2008 6:46 pm, edited 1 time in total.
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 2 guests