just wondering what the best way to wire up a light bar is? as in where to run the wires from the roof into the cab and so on.
any help would be good thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
light bar wire up
Moderator: -Scott-
light bar wire up
Rookie
Current Ride
2010 Colorado - unmolested for now.
Old Ride
88 Cruiser Middy Frp Top
33" BFG All Terrains, Tjm Bullbar, Dual Batteries & Some Awesome Tunes
T-T-T-T-T Turbo
Current Ride
2010 Colorado - unmolested for now.
Old Ride
88 Cruiser Middy Frp Top
33" BFG All Terrains, Tjm Bullbar, Dual Batteries & Some Awesome Tunes
T-T-T-T-T Turbo
I don't like to drill holes in panels if I can avoid it so I ran my wiring up to the snorkel, then there's just a small hop to the light bar.
I used a compact trailer plug so I could take the light bar off if I wanted to and there'd just be a plug near the top of the snorkel.
I used a compact trailer plug so I could take the light bar off if I wanted to and there'd just be a plug near the top of the snorkel.
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 1 guest