Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
The solinoid normaly bolts into the top of the arb compressor and has the 2 wires that activate it. Did it come with the loom for it if not probaly best pick one up
One Bit screws into the compressor tank the other fittting with the orange ring has the blue line run into it which runs to diff fitting and the other purge part is to vent the air out when you dis-engauge the locker some have a small filter in there which screws out (Makes it louder) which is how most are setup or you can buy a fitting that screws in there which you connect the blue line into to run a vent line to the outside of the cab if you have the compressor inside.
