Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How easy to install a "headlight beeper"

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

How easy to install a "headlight beeper"

Post by alien »

You know how when you accidentally leave the lights on and most modern cars have a beeper to let you know???

How would i got about setting something like that up on my suzuki? are there even parts for that sort of thing available?

I think it'd be a handy thing to have, as i quite often drive with my lights on, get out walk 5 steps before wondering "did i turn the lights off?" hehe
The worst thing about censorship is ███████.
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Try posting in the auto electrical section. One of the gurus there would be able to help
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

They drive me nuts, that and door open alarms :twisted:

Better idea, IMO, and less annoying, and possibly easier, would be to wire them to you accessories circuit.

Keys come out, lights go off.
60 + Turbo, 33"s :armsup:
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

Jaycar sell a kit, full instructions, pretty easy if you can use a multimeter (lead light) and a set of crimps (Soldering iron is better)
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I'm with Rocky.

Find your headlight relay (if you don't have one, upgrade ;) ) and identify the coil circuit. Insert a second relay in this circuit, which comes on when accessories/ignition are on. That way, if your keys are in your pocket, you know your headlights are off.

Dash lights could be another issue - depends on how your car is wired, and where you insert your second relay. :?
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

you could set something simple up with a two small headlight relays,
youd need a wire to the interior light (door switch), one from the ignition, and one from the headlights.
Set it up so that the power flows from the headlights +ve (take power from the steering column loom park light wire) through the first relay - normally open, have it controlled by the interior light so when the int light comes on (door open) the relay closes allowing the headlight power to flow to the next relay wired normally closed (you can get relays that can be wired n/c or n/o) with power from the ignition holding it closed, the headlight power would then come out of that and head through a buzzer (dick smith sell them) to ground.

Therefore if the head lights are on you have power, door open and ignition off, the power makes it to the buzzer and bzzzzzzzzz, there you go.

Probably plenty of fancier ways to do it but they'll all need the same basic inputs and this is something i can make with parts i have on hand now.
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Patroler wrote:you could set something simple up with a two small headlight relays,
youd need a wire to the interior light (door switch), one from the ignition, and one from the headlights.
Set it up so that the power flows from the headlights +ve (take power from the steering column loom park light wire) through the first relay - normally open, have it controlled by the interior light so when the int light comes on (door open) the relay closes allowing the headlight power to flow to the next relay wired normally closed (you can get relays that can be wired n/c or n/o) with power from the ignition holding it closed, the headlight power would then come out of that and head through a buzzer (dick smith sell them) to ground.

Therefore if the head lights are on you have power, door open and ignition off, the power makes it to the buzzer and bzzzzzzzzz, there you go.

Probably plenty of fancier ways to do it but they'll all need the same basic inputs and this is something i can make with parts i have on hand now.
Good theory Patroler but Zooks are ass about electrically so when headlights are on the output is a negative. Your idea WILL work IF you run the first relay constant live and the headlights earth it out.
Jaycar kits are simple and easy to fit too but will need a relay wired ass about to work on a Zook.
Jas.
Posts: 124
Joined: Sat Aug 21, 2004 7:07 pm
Location: Sydney

Post by wisey »

Tricky Dk's had them for $10. Earth, park light wire, audible and flashing. Use my lights more often now for safety and no worries about forgetting to turn off.
Born Wise, no Excuses
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

i like the accessories idea - thanks for that ill look into it =)

I've wanted to upgrade the headlight wiring for a while, this might be the perfect excuse!!!
The worst thing about censorship is ███████.
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

RockyF75 wrote:They drive me nuts, that and door open alarms :twisted:

Better idea, IMO, and less annoying, and possibly easier, would be to wire them to you accessories circuit.

Keys come out, lights go off.

This is one of the best things about driving a Subaru, they are wired from the factory like that.

My Zook will be getting wired this way too as I am retarded and would leave my lights on all the time. :roll:
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Posts: 217
Joined: Wed Sep 17, 2003 3:27 pm
Location: Canberra, ACT

Post by GOONA »

Not really the best way to do it, but what i do is lock the drivers door, so when i jump out and the door is locked i know my lights are still on...
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

GOONA wrote:Not really the best way to do it, but what i do is lock the drivers door, so when i jump out and the door is locked i know my lights are still on...

that makes no sense... at least you know that with your door locked, no1 can get in and turn off your lights for you :finger:
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

I have always had these on my vehicles. I use a Tandy 'Headlight Alert'. Only a two wire connection and if the healights are on with the ignition off it beeps and a red LED flashes. Can't seem to find them on the Tandy website though.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 194
Joined: Sun Oct 08, 2006 11:07 pm
Location: Brisbane

Post by mick85 »

Get a dual battery system :D
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

Buy a toyota and they will turn your lights off for you automatically.

Havent turned the lights off in the prado for 4 years! :D
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Post Reply

Who is online

Users browsing this forum: No registered users and 123 guests