Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Winch in a bullbar

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 158
Joined: Thu Jul 10, 2008 1:19 pm
Location: Southern Tablelands

Winch in a bullbar

Post by create »

I have an ARB bullbar fitted to my GQ. Whats the difference between this and the winchbar version of this bullbar? Can I just remove the number plate and cut a hole for the winch and mount it? Does it need extra strengthening?

Thanks
Phil

Image
Last edited by create on Fri Oct 03, 2008 1:38 pm, edited 1 time in total.
Top
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

You could probably modify it to take a winch. Where the winch mounts on the winch bar, there is another steel plate for reinforcement on the inside.

If you have a warn or Magnum winch with the ARB winch bar, there is no dicking about it all just bolts straight in.

If I were you I would keep an eye out for a second hand one, they pop up from time to time in the for sale section on here and on ebay and then just sell your bar. The price should be about the same.
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

a winch will not fit in that bar without major modifications I know as i did it with my arb non winchbar on my gq the bar is physically not big enough to fit a winch without cutting the top out of the bar I made a winch cradle for mine out of 6mm plate and it has worked a treat.

this is the base of the cradle i used i welded a bottom and sides on this aswell
Image

and while i was there i lifted and strengthened the mounts for a body lift
Image

the finished product
Image
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 87
Joined: Tue Apr 29, 2008 7:56 pm
Location: Out Hunting For A Cure To This 4wd Disease!!

Contact:
Contact Rough_Rider

Post by Rough_Rider »

Hey Mate. I have an arb highmount bar curently on my gq that i am selling. Its a great bar for every weekend wheeling but not what i want for a comp truck. Im in melbourne. if your interested pm me and ill drop you my mobile.
RiDe It RoUgH oR dOnT rIdE iT aT aLL!!

www.roughriderracing.com.au
Top
Posts: 158
Joined: Thu Jul 10, 2008 1:19 pm
Location: Southern Tablelands

Post by create »

Thanks for your help guys. I'm not really in a position to buy another bar so I may have a crack at fitting a low mount winch.
I have access to a full workshop and mig welder.

Phil
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
Top
Posts: 141
Joined: Wed Mar 02, 2005 5:59 pm
Location: bendigo

Post by AdrianGQ »

Yer if you have the gear and the abillity then go for it just bear in mind the loads that it will have to handle and put some thought into the design before you start and if your not a good welder just tack it together and get someone to weld it
i mounted a pto in mine and it came up pretty good
Top
Posts: 123
Joined: Thu Apr 03, 2008 11:23 am
Location: mooroolbark Victoria

Post by tigerz11 »

low mount winch is 562 mm in length

,http://www.thiswotidonow.com/ebay/STEVESINSTALL.htm

sometimes we weld the plate into the bullbar and strengthen it
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests