Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

quick question zook transfer

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

quick question zook transfer

Post by dad »

hey, been searching but cant find the thread im after so,

will a wt transfer (92) bolt straight into a 86 nt?
any difference in the gearing?
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Transfer will bolt in but shaft flanges are different.
Gearing is same.
Jas.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

and you won't have a handbrake...

Flanges /handbrake can be swapped without disassembly though.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

ok thanks
cant go have a look at it till tomorrow,
can i change over the flanges on the transfers or will i need tobuy some wt shafts?
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

Just swap the flanges. You will need to make a bar to stop the flange spinning - just a star picket or some scrap with a couple of holes in it, and a rattle gun.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

thanks for the input guys. steve - i dont get what your saying about the handbrake, both cases have the drum on the end... but i guess ill find out tomorrow.

thanks again
nic
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

dad wrote:thanks for the input guys. steve - i dont get what your saying about the handbrake, both cases have the drum on the end... but i guess ill find out tomorrow.

thanks again
nic
if thats the case its not a 92 transfer
michael
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

its got handbrake and 4wd light wiring, wrecker said it came out of a 92.
might go in easier than i thought
Posts: 335
Joined: Sat Aug 05, 2006 11:21 pm
Location: Sunshine Coast

Post by Taff »

92 models have the handbrake on the rear diff, if theres a drum on the transfer it came out of a NT.


on the plus side, it will bolt in easier than if it was from a WT.
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

yeah bolting straight in sounds sweet. but in the future i want to do the gearing, and i think i read on here that ill need a wt case for that.
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

as long as its got the light switch it will accept gearing in the future
michael
User avatar
dad
Posts: 394
Joined: Mon Dec 31, 2007 8:27 am
Location: sydney

Post by dad »

oh ok happy days, can rebuild my old one, and no down time! ...

threw it in today, had to swap jackshaft and front tailshaft flanges.
the oil in the old one looked like thick mettalic paint with chunks of gear in it.
the new one came complete with golden oil :armsup: hehe tightarse

car drives alot better, alot less sloppy, what a difference.

thanks for help guys

nic



Image
pic from last week
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest