Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Steel for rocksliders for Disco

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 34
Joined: Fri Apr 06, 2007 10:44 pm
Location: Melbourne

Contact:
Contact Eddi66

Steel for rocksliders for Disco

Post by Eddi66 »

I am trying to source silo section (or silo tube) in Melbourne to make rocksliders for my Disco - same as Glenn Wright did on his Rangie in 4wd Monthly. He sourced his from Dubbo. Can anyone help me with this? I do not want to use just plain RHS. I have called many places and can only get 40t or 20 lengths - but that is a bit more than i need.
Thanks
91 Custom GQ extra cab, 4.2 Intercooled Turbo
Pres - Eastern Ranges 4x4 Club
Operations Manager - Opposite Lock
Top
Posts: 10
Joined: Sun Jan 20, 2008 1:29 pm
Location: melbourne

Post by dirtdawg »

unless you few ppl to chuck in for steel and a bit more for making them up, that could work ;)
Top
Posts: 16
Joined: Thu Jul 10, 2008 11:20 pm
Location: Melbourne

Post by PeterM »

Give Dandy Steel supplies a call to see if they have any tube available. They also cut to length for you.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests