Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NJ Front Diff Swap

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 12
Joined: Tue Jun 10, 2008 6:22 pm
Location: Logan

NJ Front Diff Swap

Post by barneymutt »

Hey all,

I'm about to swap my front diff (NJ auto) for a manual diff.

Can anyone tell me what I'll need before I get started.

Never done this before so no idea what I'm in for.

Am I likely to need any bits and pieces or special tools for the job.

I don't want to get half way through the job and find I can't finish because I don't have everything (but I suppose you can never know).

I have to swap over the axles and cv joints from the old diff to the new one.

Any and all advise will be most appreciated.

Thank you.
Top
Posts: 193
Joined: Tue Nov 13, 2007 7:11 pm
Location: NZ

Post by WACKO »

are you swaping from the 7.25" to 8" diff? if so you will need the front propshaft too. no special tools that i can remember.

Sam
93 jtop pajero, SAS'd (almost)... http://www.outerlimits4x4.com/viewtopic.php?f=4&t=125224
Top
Posts: 12
Joined: Tue Jun 10, 2008 6:22 pm
Location: Logan

Post by barneymutt »

Yes, going to the 8" and I have the drive shaft.

Thanks Sam.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest