Has anyone here fitted a snorkel to a 2.8TD GQ before? I have been looking at the Airflow one for $325 and was going to fit it myslef (no probs) but the kit does not include new aircleaner housing. Do I have to cut off and cover up existing intake on filter housing and cut new entry hole?
Anyone done it?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Fitting Airflow Snorkel to 97 GQ 2.8TD
Fitting Airflow Snorkel to 97 GQ 2.8TD
97 GQ 2.8TD Lifted 2" etc etc..more to come :)
Yep.
I did mine a few months ago.
I got the kit that modified the original Air cleaner housing.
TIP.... make sure that all the templates are in exactly the right place...double check and double check.
Take your time and it works well ....and is not hard at all really
I used a jigsaw with a metal cutting blade on it to cut out air cleaner template....but trimming still needs to be done with tinsnips and dremel grinder.
I have also since installed a 3inch in/out Donaldson air cleaner which is just a bit better than standard one...altho the standard one worked OK anyhow.
HTH...n good luck with it.
Cheers Keith
I did mine a few months ago.
I got the kit that modified the original Air cleaner housing.
TIP.... make sure that all the templates are in exactly the right place...double check and double check.
Take your time and it works well ....and is not hard at all really
I used a jigsaw with a metal cutting blade on it to cut out air cleaner template....but trimming still needs to be done with tinsnips and dremel grinder.
I have also since installed a 3inch in/out Donaldson air cleaner which is just a bit better than standard one...altho the standard one worked OK anyhow.
HTH...n good luck with it.
Cheers Keith
Nuthin is ever the same once I own it !!
[quote="Cort500"]Thanks for the tip. Did you buy the Airflow brand snorkel? Were all the pieces in it that you neded? I think it is a S49 part number.
If you dont mind me asking where did you get yours from and how much did you get it for?[/quote
Yep ...bort an Airflow one...n everything was in kit
S49 part number doesnt sound right...n I,m not headin down to the shed to check now ...Too damn cold
I got mine from TJM Orange...and it was under $500 bux from memory ....cant remember exact figure as it was a gift
AFAIK...there are 2 different kits to fit the RD28 GQ...so make sure the one you get is the one you need/want.
Cheers Keith
If you dont mind me asking where did you get yours from and how much did you get it for?[/quote
Yep ...bort an Airflow one...n everything was in kit
S49 part number doesnt sound right...n I,m not headin down to the shed to check now ...Too damn cold
I got mine from TJM Orange...and it was under $500 bux from memory ....cant remember exact figure as it was a gift
AFAIK...there are 2 different kits to fit the RD28 GQ...so make sure the one you get is the one you need/want.
Cheers Keith
Nuthin is ever the same once I own it !!
Who is online
Users browsing this forum: No registered users and 2 guests