Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

std or lifted

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

std or lifted

Post by seaeagle »

how can i tell if the 80 series has been lifted/modified?
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Post by Mr DJ »

First check the height from centre of wheel to lip of guard F&R, and post the measurements, maybe someone will be able to tell you.

Are the coil springs black or painted another colour (yellow, blue, etc.), if they are black it's a good chance they are stock.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

cool,

rear is 480mm
front is 510mm

springs look black
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

hey mate, sounds like poor original springs to me.

check out this thread on offroad80s
http://www.offroad80s.com/how-high-is-y ... t1336.html

In conclusion; from center of wheel hub to bottom of your flare/guard.
Stock:
Front 520mm - Rear 525mm

2inch Lift
Front 560mm - Rear 570mm

4inch Lift
Front 645mm - Rear 670mm

6inch Lift
Front 690mm - Rear 725mm
Team: Cause For Concern
http://www.offroad80s.com
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

wow, i must have the only lowered 80 ... :lol: :cry:

rear has sagged heaps if the link fingures are anything to go by.

ok time to look for a lift :P
Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests