Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1984 pajaro

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 62
Joined: Fri Jul 18, 2008 7:06 pm
Location: bush

1984 pajaro

Post by cashy »

hey all my mate has a pajaro 1984 and the engine in making some wierd vibration under load but when its not unger load its fine we got hold that its the balancing shaft could this be true

had a quick look today and there seems to be alot of oil leaking out either from the exhust manifolds or the head

should he just replace the whole thing is it worth fixing

dont know know much about these truck so some help would be much appretiated cheers cashy
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

what type of motor would be a help..
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 62
Joined: Fri Jul 18, 2008 7:06 pm
Location: bush

yeah thats a point

Post by cashy »

arrrr. rang him he said its a 4 cylinder 18rc or 4g54 dose that mean anything to you
cheers cashy
Posts: 62
Joined: Fri Jul 18, 2008 7:06 pm
Location: bush

helpneeded

Post by cashy »

so nobody knows anything
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

4g54 is the 2.6 litre petrol motor - have NFI where the 18rc bit would come into things.

Vibration only under load suggests to me that it's an issue with mounts flexing/broken. I've had a balance shaft out of alignment, and it only really became an issue at high revs - load or not.

Oil shouldn't be leaking from the exhaust manifold. I would guess it's coming from the rocker cover gasket and dripping past the exhaust manifold. You'll probably find the back of the engine is covered in oil, as is the gearbox. Replacing the gasket is a simple job, but make sure you clean the PCV fitting and the rear half moon, then apply a thin smear of silicone to both when you re-assemble. Also make sure the PCV is venting properly - if not, blowby pressurises the rocker cover, and even a new gasket will continue to leak.

Good luck,

Scott
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest