the next thing on the agenda was a body lift which seams to be what everyone is doing these days so why not put one in the cruizer
so first thing was to strip the cruizer to get to all the mounts
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift003.jpg)
we had a little trouble with one off the mounts so out came the grinder and that was the end of that one
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift002.jpg)
then it was time to work out how much i needed then make up the mounts
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift005.jpg)
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift006.jpg)
quality work place health and safety here as we lifted the body
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift008.jpg)
and off course some of the bolts were not long enough so a little custom work and we have a new one
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift011.jpg)
so some shots of the finished product
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift013.jpg)
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift015.jpg)
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift016.jpg)
![Image](http://i268.photobucket.com/albums/jj39/Cruizer_Dan/mods/bodylift017.jpg)
next up will be the bar work, lift the front bar and fill in the rear