Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Can I change swivel bearings without removing the hubs/stub?
Can I change swivel bearings without removing the hubs/stub?
I need to replace the swivel hub bearings in my GQ. To save time, is it possible to remove the swivel by undoing the 4 bolts top and bottom but leave the wheel hub and stub axle in place that is, pull the entire hub and swivel assembly and axle straight off without dissassemling anything else?
You can but getting the outer race of the bearing might be a bit hard as you usually tap it out from inside the hub.
Might as well do it properly & put seals in it and regrease your CV's while your at it.
Might as well do it properly & put seals in it and regrease your CV's while your at it.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
Re: Can I change swivel bearings without removing the hubs/s
Yes, it is possible, but the whole thing is bloody haevyMark2 wrote:I need to replace the swivel hub bearings in my GQ. To save time, is it possible to remove the swivel by undoing the 4 bolts top and bottom but leave the wheel hub and stub axle in place that is, pull the entire hub and swivel assembly and axle straight off without dissassemling anything else?
Who is online
Users browsing this forum: No registered users and 0 guests