Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Waterproofing airbox

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 172
Joined: Sat Oct 07, 2006 3:08 am
Location: Ottawa, Canada

Contact:
Contact lshobie

Waterproofing airbox

Post by lshobie »

Hi Guys,

On my last wheeling trip I got about half a cup of water in my airbox catch can - that little can that attaches to the bottom of the airbox. Seems like it is coming in the felt seals on the lid and little catch can.

Any ideas on the best way to seal these things up?

Thanks.

Louis

HZJ79
HZJ79, 1HZ turbo, intercooled, 36" SS TSL's, ARB air, ARB front locker, factory electric rear locker, Dual batteries, Dual fuse blocks, 8274,
Check out my videos: www.youtube.com/lshobie
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

if you have a factory snorkie, keep in mind that toyota do NOT rate them as a water snorkel!

The seal where it goes from the guard piece to the pillar is nothing but a bit of foam and is NOT water proof.

You have felt seals on your catch can and lid? The HZJ79 i have for work has rubber seals on both of those!
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Also check the one way valve in the bottom as it supposed to let water out and stop it coming in
plenty of parts on the bench
Top
Posts: 172
Joined: Sat Oct 07, 2006 3:08 am
Location: Ottawa, Canada

Contact:
Contact lshobie

Post by lshobie »

The one way valve was buggered so I plugged it. Ya it has felt seals - no idea why but all the mine trucks here that I have seen have them. Oh, and the airbox top is off an HDJ81 because of the turbo - so it is felt as well.

Louis
HZJ79, 1HZ turbo, intercooled, 36" SS TSL's, ARB air, ARB front locker, factory electric rear locker, Dual batteries, Dual fuse blocks, 8274,
Check out my videos: www.youtube.com/lshobie
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

So were you driving deep water holes or stuff over the bonnet or was it just raining and puddles
plenty of parts on the bench
Top
Posts: 172
Joined: Sat Oct 07, 2006 3:08 am
Location: Ottawa, Canada

Contact:
Contact lshobie

Post by lshobie »

Deep water- found the problem, seems there was a hole in the intake part of the airbox - got it plugged - all is good now.

Thanks guys.
HZJ79, 1HZ turbo, intercooled, 36" SS TSL's, ARB air, ARB front locker, factory electric rear locker, Dual batteries, Dual fuse blocks, 8274,
Check out my videos: www.youtube.com/lshobie
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests