Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Concerns with too much castor?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Concerns with too much castor?
I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.
I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.
What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..
The extra castor would just mean heavier steering and more self centering???
I had castor bushes fitted but it still wanders too much for my liking.
I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.
What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..
The extra castor would just mean heavier steering and more self centering???
too much caster lead.
(draw a line through the top & bottom king pin or ball joint and then project it down to the ground. The distance from that point to where the tire actually touches the ground is called caster lead.) This is directly caused by caster angle.
If castor angle is to high it will cause death wobbles.
1.5 - 4 (max) degrees of castor we've found to be OK. but more could be bad!!
You could get the rear offset bushes rotated 180' so they don't give caster correction. The arms will sit a little bit lower but wont hurt any thing..
(draw a line through the top & bottom king pin or ball joint and then project it down to the ground. The distance from that point to where the tire actually touches the ground is called caster lead.) This is directly caused by caster angle.
If castor angle is to high it will cause death wobbles.
1.5 - 4 (max) degrees of castor we've found to be OK. but more could be bad!!
You could get the rear offset bushes rotated 180' so they don't give caster correction. The arms will sit a little bit lower but wont hurt any thing..
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
Excessive caster won't cause death wobbles unless there is another underlying problem, there are other fixable causes for wheel wobble.
It will make the steering heavy at low speeds and may put extra stress the front uni due to the angles. Don't be concerened about running a little extra, most late model vehicles run high castor for high speed stability. You are better off with stock bushes though as they offer better flexibility as they are a centred bush, they will last longer to if you use genuine ones.
Joel
It will make the steering heavy at low speeds and may put extra stress the front uni due to the angles. Don't be concerened about running a little extra, most late model vehicles run high castor for high speed stability. You are better off with stock bushes though as they offer better flexibility as they are a centred bush, they will last longer to if you use genuine ones.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Re: Concerns with too much castor?
im guessing the castor bushes are the hard poly type?rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.
I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.
What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..
The extra castor would just mean heavier steering and more self centering???
if so, why the hell would you keep these in a 4x4???
Serg
you got it..mavzilla wrote:did caster bushes, and caster plates later on ,and left the bushes in, guess what they shake the same as not enough caster in the front
PGS 4WD. Ever see a shoping trolley with carster slap?
I have....
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
X3. Caster slap only occurs when the trolley wheels are loose or bent, not on new, tight trolleys.Yom wrote:PGS 4wd is right - castor alone will not cause live axle wheel wobbles.
We have death wobble problems with suzukis and while it can be effected bu caster, caster isn't the cause.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: Concerns with too much castor?
rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.
I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.
What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..
The extra castor would just mean heavier steering and more self centering???
Go heaps of carster and tell us how it goes. you'll have 6-7 degrees IMHO.
bet ya it wobbles...
whitemav wrote: Did I get my answer ? Yes, in 2 post's out of 4 pages of which half are utter bull shit and off topic nit picking.
Re: Concerns with too much castor?
Only because patrols front end is crazy sensitive and requires someone who knows what they're doing when overhauling it and absolutely no wear/movement ANYWHERE in the linkages and bearings which is guaranteed not to exist in a vehicle thats travelled more than 100,000km on our roads IF it hasn't ever been completely overhauled with brand new componentsexV8er wrote:rascal75 wrote:I currently have a GUIV with 4" spring lift.
I had castor bushes fitted but it still wanders too much for my liking.
I am thinking now about going drop boxes, but dont want to spend extra to remove the castor bushes and refit std ones.
What problems will there be if I fit the drop boxes and leave the castor bushes in there. ie too much castor correction..
The extra castor would just mean heavier steering and more self centering???
Go heaps of carster and tell us how it goes. you'll have 6-7 degrees IMHO.
bet ya it wobbles...
Who is online
Users browsing this forum: No registered users and 1 guest