Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
My brake lights don't work
Moderator: -Scott-
My brake lights don't work
My brake lights aren't working, only tail lights. Could it be the switch above the brake pedal???? I have checked fuses and earths and everything is ok
Whats up!!
Brake light switch
I'd also be checking out the switch at your brake pedal, Take the wires off the switch and alternately short, then open the connection between the two while somebody looks at the lights for ya.
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Re: Brake light switch
Impulsive wrote:I'd also be checking out the switch at your brake pedal, Take the wires off the switch and alternately short, then open the connection between the two while somebody looks at the lights for ya.
No need to disconnected the wires to short them- just short out the switch with a screwdriver/ short piece of wire or something similar.
Also have a close look at the wires where they're joined to the switch, one vehicle I had they were soldered onto the switch and had come loose.
David
Who is online
Users browsing this forum: No registered users and 15 guests