hey all
me and a couple of mates were just mucking around with the idea
of putting a bov in my hilux
its got a surf motor so it will most likely fuck itself
but just wondering
how hard it would be to do??
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
blow off valve
Moderators: toaddog, Elmo, DUDELUX
Are you talking the 2L?
It can be done on a diesel, A bloke I work with rigid a setup from his vacuum for his brakes through a solenoid activated from the clutch to provide the vacuum to open the BOV on a turbo 3L.
I have to ask why you would want to though other than the wank factor? It would not improve the performance of the car at all. The whole idea of a BOV is to stop the turbo staling as the throttle butterflies close. Therefore making the car come back on boost quicker after a gear change and increasing the life of the turbo by preventing the shock loads caused by the compressor stalling. As a diesel does not use a throttle body like a petrol I fail to see the point of it.
It can be done on a diesel, A bloke I work with rigid a setup from his vacuum for his brakes through a solenoid activated from the clutch to provide the vacuum to open the BOV on a turbo 3L.
I have to ask why you would want to though other than the wank factor? It would not improve the performance of the car at all. The whole idea of a BOV is to stop the turbo staling as the throttle butterflies close. Therefore making the car come back on boost quicker after a gear change and increasing the life of the turbo by preventing the shock loads caused by the compressor stalling. As a diesel does not use a throttle body like a petrol I fail to see the point of it.
Ben
Who is online
Users browsing this forum: No registered users and 121 guests