Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Not aware of a "competition clutch" for a Feroza.....
Excedy make one ( actiually a whole range - but ceramic are way too harsh... ) for the Applause which will bolt up to the Feroza, but its a slightly smaller diameter. I ran one for awhile and its worked ok but was less progresssive in take up than a stock unit.
Also used the Excedy competition pressure plate with a standard Applause driven plat and that was much better but ended up pulling the whole thing out to fit an auto.
Flywheel, comp pressure plate, comp driven plate and standard driven plate are currently all sitting in my "superceeded" Feroza pile.
If you can arrange transport you can have what you want for nix.
If all else fails I can put you onto a source for drive components in Australia - but you'l have to buy and ship those.
Still an out of action vehicle isn't much fun or use.......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
