when you do a shackel reversal on a fj45 do you need a 2" dropped shackel on the front???????????
some help please.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
FJ45 shackel reversal
Moderators: toaddog, Elmo, DUDELUX
mmm
nope.
The reason must SR have a lowered front spring hanger is to get the correct caster and pinion angle back as if you do not have a drop hanger then the diff gets rolled due to the spring perch angle.
So if you don't want to have a drop hanger then you can cut and turn your diff housing.
The reason must SR have a lowered front spring hanger is to get the correct caster and pinion angle back as if you do not have a drop hanger then the diff gets rolled due to the spring perch angle.
So if you don't want to have a drop hanger then you can cut and turn your diff housing.
Who is online
Users browsing this forum: No registered users and 0 guests