Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

can you tube a tubeless tyre?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

can you tube a tubeless tyre?

Post by dont_follow_me »

title explains it all

I have tubeless tyres but one of the beads has a small section out of it and it leaks air, slowly, but i does leak.

can I put a tube in it?

its a relatively new tyre so I dont want to throw it away :cry:
Satnav with Teretts, now thats funny....
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

As long and the tyre isnt goin to come over the bead of the rim.. yes you can without a worry

Sterlo
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

the bead is quite secure under the edge of the rim. There is a small section of the 'outer bead', about 10mm that is missing. its the square bit that sits on the outside edge of the rim if that makes any sense.

when I hosed the truck down the other day, this missing secton was at the bottom most point and some water sat between the bead and the rim and cause it had some water on it, I could see the water bubbling and could just hear the air escaping through the water.

when I called into a tyre place this afternoon, they told me it couldnt be done as the tube would rub against the inside of the tyre...well, of course it would, they all do, but it didnt sound like a good enough reason.

then they wanted to sell me new tyres and rims and it all became obvious :finger:

maybe I should 'shop around' :twisted:
Satnav with Teretts, now thats funny....
Posts: 345
Joined: Mon Aug 04, 2008 8:48 am

Post by chpd80 »

wack a heavy duty tube in it and you will have no more probs. :D
Posts: 216
Joined: Sat May 17, 2008 11:46 pm
Location: Melton Sth, vic

Post by dklyne454 »

Sweet. I have a 33 Claw that has done about 2500 km's, and having them swapped on the rims, one got a small chunck removed from the bead. as i couldn't prove that it was caused by the tyre fitter that did it, he wouldn't waranty my tyre.
Went somewhere else, and they said same thing. couldn't be done, but they have a good deal on at the moment. they also offered to "dispose" of the tyre for me. sounds like one of them may have just fitted it up to they're fourby.
92' Mav. seat covers, air freshner, floor mats, half eaten sandwich..........
http://www.outerlimits4x4.com/ftopic147700.php
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

post a photo of the damage to the tire.
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

here

Image

Image
Satnav with Teretts, now thats funny....
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

its a 33x12.5x15 BFG mud terrain, i reckon its done about 5000kays, its hardly worn at all so I dont want to throw it away :roll:
Satnav with Teretts, now thats funny....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Tube may fix your problem. Find some Simex heavy duty tubes.
mate threw away a BFG MT with less than 100klms on it.... sliced shit out of sidewall on a star picket someone had thrown into a slushy hole we had to cross.
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

bogged wrote: sliced shit out of sidewall on a star picket someone had thrown into a slushy hole we had to cross.
i hate crunts that do that :bad-words:
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

yes you can.
ive done it before with no issues til i blew the tyre out. (old farken tyres)
whoever told you that it couldnt be done is talking shit.

and for what its worth that picture with the little chunk missing is not the sealing surface. they seal down at the bottom of the lip, where the edge of the tyre is, which is rather hard to damage unless the tyre is damaged when off the rim or not installed properly.
could just be some shit in the bead.

find a good honest tyre guy and have a chat, if you find a good one, look after him, an honest tyre guy is hard to find.

cheers, andrew
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

If you put a tube in make sure you remove any labels, or other imperfections, from the inside of the tyre which could chafe against the tube.
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Posts: 60
Joined: Fri Jun 15, 2007 7:34 pm
Location: newy

tyre

Post by paul44b »

Mate knock the bead off the tyre and see if the bead is clean, doesn't look like much damage...seen worse
Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests