Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spring clamps
spring clamps
should i shouldnt i open up my clamps? if so how many do i open up?, wat would the on road be like?
Re: spring clamps
bazooked wrote:should i shouldnt i open up my clamps? if so how many do i open up?, wat would the on road be like?
I'm running some Old Man Emu springs and have removed both the overloads, and all the spring clamps...
what you will gain will just be droop (spring flex)...
mine still handles okay on the street (for a sierra)... but i think that my shocks would have a fair bit of control over this.
cheers
DMA Founding Member #1 - Now Retired
I have a stock sierra and I just bent them up so that they still stop the springs from spreading, but don't limit the amount of seperation between the leaves.
still drives good.
still drives good.
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
stumped wrote:so what do the spring clamps normally do? do they stop the springs from getting outta alignment?
Yeah they stop the springs from getting out of alignment, and from opening up too much too... if you take them off you should (assuming your can put enough leaverage onto them) gain more droop from your springs.
DMA Founding Member #1 - Now Retired
Who is online
Users browsing this forum: No registered users and 24 guests