Thankyou.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Reverse shackle problem
Moderators: toaddog, Elmo, DUDELUX
Reverse shackle problem
Hi guys, i have just done a reverse shackle and spring over on a 40 series and the shackles are flat when sitting normal, any ideas how to fix this, are the shackles too far forward or too short.
Thankyou.
Thankyou.
Last edited by tuff 45 on Mon Sep 01, 2008 6:11 pm, edited 1 time in total.
why not like this?
http://forum.ih8mud.com/40-55-series-te ... ersal.html
through the frame, build a shackle best fits your set up.
HTH's
crusty
[/img]
http://forum.ih8mud.com/40-55-series-te ... ersal.html
through the frame, build a shackle best fits your set up.
HTH's
crusty
[/img]
here is the front of my shackle reversal - this is how i bought it with flat springs - worked well for rideability but was not built for flex... I now have arched springs with about 3 inches of lift and the shackle sits on a good angle now.
and the rear
and the rear
even when you spell out commonsense to the RTA they still ignore it!
Who is online
Users browsing this forum: No registered users and 60 guests