ok iv got a 1lt ute thats going to need a motor and box what cars other than a zook have a F10A and 4speed in them??
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
f10a
f10a
I dont know squat!!!!!!!!!!
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
Re: f10a
Why not upgrade to something that can pull the skin off of old milk?over land 4x4 wrote:ok iv got a 1lt ute thats going to need a motor and box what cars other than a zook have a F10A and 4speed in them??
thanks
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
I don't believe a 1.0 maruti motor will bolt in to a 1.0 sierra. (But I could be wrong) I believe the maruti motor mounts like a 1.3.
There's not really any good alternative to a sierra motor. Even if you source a carry motor (as an example) your still going to want sierra trim to get it in the car - mounts, sump, gearbox etc so it would nly be useful as a core.
Steve.
There's not really any good alternative to a sierra motor. Even if you source a carry motor (as an example) your still going to want sierra trim to get it in the car - mounts, sump, gearbox etc so it would nly be useful as a core.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
thanks for that i think i may of found a 1lt tin top thats got a lot of rust in it the old fart thats got it wants $500 for it its all there and i was told that it go's iv never looked at the 1lt zooks how much would it be worthGwagensteve wrote:I don't believe a 1.0 maruti motor will bolt in to a 1.0 sierra. (But I could be wrong) I believe the maruti motor mounts like a 1.3.
There's not really any good alternative to a sierra motor. Even if you source a carry motor (as an example) your still going to want sierra trim to get it in the car - mounts, sump, gearbox etc so it would nly be useful as a core.
Steve.
also my ute has auto locking hubs are these any weeker than Manuel locking hubs?
I dont know squat!!!!!!!!!!
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
I think you'll find that you don't have auto hubs if you have a 1.0 ute - my guess is you have drive flanges- all 1.0 utes came with drum front brakes and drive flanges. These aren't hubs at all, and they're unbreakable - the stub axle will go first - but they mean the whole front end is turning the whole time. If your front driveshaft is anything like mine, over about 60 kph you'll have some "noticeableover land 4x4 wrote: also my ute has auto locking hubs are these any weeker than Manuel locking hubs?
" vibration. Auto hubs were an option on WT sierras but I've never seen them in Australia.
If they specificially say "auto freewheeling hub" or similar on them they've been swapped in from a 2.0 V6 vitara - the only car I can think of that had them in australia, and pull them off and put normal sierra hubs on ASAP - they're trouble prone.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
ok thanks there drive flanges not auto hubs are all 1lt frunt diffs drum brakes and if i swap the frunt diff (to Manuel lockinghubs) and front driveshaft do you think this will fix the vibration
I dont know squat!!!!!!!!!!
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
"Just when I think you've gone and said the stupidest thing ever, you keep on talking!"
probly should be in the maruti thread but the maruti engine mounts are not the same as 1.3 (on mine anyway) they look every bit like the 1lt mounts but have 10mm bolts instead of 8mm and only have 2 bolt holes per side not 3
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
:?I've looked at a fair few 1.0l utes, all of them have had front drum brakes, but I haven't seen one yet with drive flanges, all have had OEM manual free wheeling hubs.Gwagensteve wrote:my guess is you have drive flanges- all 1.0 utes came with drum front brakes and drive flanges.
Gwagensteve wrote:These aren't hubs at all
Technically neither are the free wheeling hub mechanisms that are being referred to in this thread. 
Well I had them on my 1.0 and I just picked up another set off another 1.0DieselZook wrote::?I've looked at a fair few 1.0l utes, all of them have had front drum brakes, but I haven't seen one yet with drive flanges, all have had OEM manual free wheeling hubs.Gwagensteve wrote:my guess is you have drive flanges- all 1.0 utes came with drum front brakes and drive flanges.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
can confirm that maruti mounts dont suit 1.3 they are a 1 litre mount...the 1.3 bolts in lower and a bit forward to the 1.0...christover did a good thread on 1.3 to 1.0 a while back he did it with a plate im doing it the same look here
http://winter2006.4wheelingoz.com/wi06H ... daFROG.htm
heres his build up if your thinking 1.3 to 1.0
http://winter2006.4wheelingoz.com/wi06H ... daFROG.htm
heres his build up if your thinking 1.3 to 1.0
Who is online
Users browsing this forum: No registered users and 26 guests