I would like to know the best way to remove the rear side windows on a 77 2 door rangie.
I looked in the Haymes manual and it only tells me how to remove the sliding window and RAVE only refers to the 4 door models.
I want to remove the glass and the frame, do I remove it all together or take out the glass first?
I can see some small bolts under the window frame, what to these remove?
Any help appreciated
Neale
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Removing rear side windows
Moderator: Micka
Removing rear side windows
1977 Range Rover Classic
1989 Range Rover Classic (Project)
1993 Discovery 200tdi (Project)
1995 Landcruiser Troopcarrier
1996 Discovery 300tdi (Daily Driver)
1989 Range Rover Classic (Project)
1993 Discovery 200tdi (Project)
1995 Landcruiser Troopcarrier
1996 Discovery 300tdi (Daily Driver)
Range Rover rear side windows
Hi, If u need new windows, I have both sides out of a 82 2 door, one is near new, the other is in a1 con. These ones r the alloy type, don't rust.
Cheers, Gary.
Cheers, Gary.
OK Time for update
Sorry but none of the suggestions worked!
I undid the nuts on the bottom of the windows, leaving the bolts locating the window frame, so it could not be pushed out.
So I managed to get the rear glass out by pulling it toward the front of the car, until it came out of the rear rubber, then pulled the top outward from the rubber and lifted it out of the bottom.
On the top there were pop rivets going through the window slide into the frame, after knocking them off with a cold chisel the top frame fell out, I then removed the rubber.
Job done and no broken windows.
Hangover: Thanks for the offer, but the windows won't be goind back in.
Sorry but none of the suggestions worked!
I undid the nuts on the bottom of the windows, leaving the bolts locating the window frame, so it could not be pushed out.
So I managed to get the rear glass out by pulling it toward the front of the car, until it came out of the rear rubber, then pulled the top outward from the rubber and lifted it out of the bottom.
On the top there were pop rivets going through the window slide into the frame, after knocking them off with a cold chisel the top frame fell out, I then removed the rubber.
Job done and no broken windows.
Hangover: Thanks for the offer, but the windows won't be goind back in.
1977 Range Rover Classic
1989 Range Rover Classic (Project)
1993 Discovery 200tdi (Project)
1995 Landcruiser Troopcarrier
1996 Discovery 300tdi (Daily Driver)
1989 Range Rover Classic (Project)
1993 Discovery 200tdi (Project)
1995 Landcruiser Troopcarrier
1996 Discovery 300tdi (Daily Driver)
Who is online
Users browsing this forum: No registered users and 1 guest