Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H oil pressure

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 6
Joined: Tue Mar 11, 2008 7:56 am
Location: Mittagong/UK

2H oil pressure

Post by harrygrey382 »

The oil pressure gauge on my 2H is going very erratic. It's an HJ47 on 350K (not original motor). When at constant revs (low or high, hot or cold), the oil pressure varies. It can be correct, then drops right off to VERY low, then climbs back up, in the space of about 10-15 seconds. Is this a relief valve problem, or more like a sender problem? Should I be worrying? At 2000 revs it's sitting on the lower operating region bar worst case, and mid-2/3 way up normally.
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Are you reading this off the dash cluster, or have you tapped into an oil gallery somewhere?

Do not trust the dash gauge.

The FSM says that at idle the pressure should be 4.3psi, and at 3000rpm it should be 36-85psi.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests