Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vic Roads

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Vic Roads

Post by PGS 4WD »

:roll: Went to register my GU today, I've replaced the blown up 2.8 with a TD42 Turbo. Open the bonnet and the guy says "whats this? These never came out with top mount intercoolers" Granted mine is a 600x300 Ebay job but really. I showed him the factory scoop and explained that not only did the 2.8 but also the 4.2(some) and 3.0L diesels all have top mount intercooers standard, glad I haven't fitted the big scoop yet! Then he starts looking for the VIN number, at the front chassis rail where it is on a GQ, I point it out under the drivers door on the chassis and he writes it down, just after he says "Thats right I forgot they moved it down there when they added power steering, prior to power steering it was up here on the drivers side, then they moved it to the passenger side" I felt like saying "what in 1960!" but refrained and said "Gee a Patrol without power steering, I haven't seen one of those. Buy this time he was red faced and shaking, we went inside and to my surprise he proceeded to do the paperwork. Then the question "What's it worth?" Obvious answer, "I have the receipt for $3000, I paid that as it had a brocken engine and gearbox." "Well whats it worth now?" he says. I reply "Iv'e spent $10k on getting it going, but surely I've already paid tax on the parts I bought, Is't that taxing me twice?" He writes $5000 in the value, completes the paperwork and hands me the rego and plates.
WTF.
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 73
Joined: Thu Apr 17, 2008 2:36 am
Location: townsville

Post by Man of Cheese »

so you paid stamp duty on $5000 yea man WTF i would have said tax me on the $3000 thats how much i paid for it.
who would win between a grilled cheese sandwich and a taco?
Posts: 1022
Joined: Tue Oct 09, 2007 6:29 pm
Location: geelong

Post by AcTioN13 »

thats why when they ask how much money has been spent to get it running you dont give an amount, and tell them most of the work was done in my shed.

worked for my mini anyway
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Vic Roads

Post by bogged »

PGS 4WD wrote:Is't that taxing me twice?" .
Bought fuel or food lately? Being taxed only twice would be nice.
anyway still cheap at $5k, but can understand what ya saying.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

At least he was partially intelligent, last time I had a car re regoed it was a 250Xflow foulcan.

The guy at Vic Roads opens the bonnet and say's "Ahh she's got the big V8 in her"

I just went Uh-Hu, didn't seem worth the hassle to try and educate the bloke.

I get what you are saying about being double taxed though, welcome to Aus :D
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Post by pcman »

hehe vic roads accepted $305 in receipts as total for the last car i registered
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

They can legally charge you the "market value" stamp duty on the vehicle as a whole, regardless of what you paid for it.

Got stung an extra $80 once (after the fact, letter in the mail) on a Vitara because " they didn't agree what I paid for it was what it was worth". Done deal, not recourse (well, not worth it for $80 anyway). Next time you fill out the form, actually read it, it says "what's the value" not "what did you pay" ... or something to that affect.

Cawks! ... but that's VicRoads for you ...
KRiS
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

Yep, family friend sold their old car to their sister for way under what it was worth, and they still haven't officially transferred it as Vicroads won't let it go through for what they paid.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

"Buyer’s Dutiable Value Declaration and Signature. Statement of Dutiable Value by the Buyer (Otherwise known as market value – please refer to front sheet for information)"

http://www.vicroads.vic.gov.au/NR/rdonl ... rm0809.pdf
KRiS
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

i thought for your patrol you would of need and engineers ticket
because it had 2.8 and thats what it was built with and you changed it over to 4.2turb ,

isnt thats right?
1995 land rover disco on 265 muddies
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

matthewK wrote:i thought for your patrol you would of need and engineers ticket
because it had 2.8 and thats what it was built with and you changed it over to 4.2turb ,

isnt thats right?
The best of my knowledge, don't need any engineers if it's a motor that was offered as part of the manufacturers lineup for same model/year.
KRiS
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Post by coxy321 »

I know all of the people at my local VicRoads - so i get looked after ok.

I had my 180B valued at $500 (minimum amount allowed). The guy clearly saw how much shit was on it, but cause it looks so bloody rough on the outside I said "Take a look at it. Its over 30 years old, hasn't got a straight panel on it. What would you pay for it??" (silence and blank stare) "$500 it is then".

The GQ was different. When i called Vicroads to book the registration inspection, the lady told me the market value of $8000-$10,000, and quoted me the fees accordingly. I said "Shit! Hope i can get that much for it when i sell it!! Does it matter that i only paid $2000 for it?" Reply "Sorry sir, our RedBook market value is the standard pricing for all fees".

Anyway, when the time came, i ended up only paying fees for a $2000 car. :armsup: :armsup:

I love my redneck bumpkin town!! (sometimes).

Coxy
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

no engineers needed if everything else that was different is changes also (i.e. brakes etc.)
[quote="75 cruser"]we want more donkey[/quote]
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

RoldIT wrote:
matthewK wrote:i thought for your patrol you would of need and engineers ticket
because it had 2.8 and thats what it was built with and you changed it over to 4.2turb ,

isnt thats right?
The best of my knowledge, don't need any engineers if it's a motor that was offered as part of the manufacturers lineup for same model/year.
that is correct, as it is already available off the showroom floor as an option in that model, you are not actually changing anything. So all the hard expensive work is done for you. its like taking a petrol gq and dropping the diesel engine in
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

RoldIT wrote:They can legally charge you the "market value" stamp duty on the vehicle as a whole, regardless of what you paid for it.

Got stung an extra $80 once (after the fact, letter in the mail) on a Vitara because " they didn't agree what I paid for it was what it was worth". Done deal, not recourse (well, not worth it for $80 anyway). Next time you fill out the form, actually read it, it says "what's the value" not "what did you pay" ... or something to that affect.

Cawks! ... but that's VicRoads for you ...
Been threatned buy this several times last was my patrol how much $600 is that market value, my responce was well thats what i paid so it must be.

My first car was given to me from dad, Went to register and they ask for a recepit, But i did not have one I said the last owner was my father and he has given it to me. but did not work had to have a reicept for a car that was given to me so told then it was a little hard as my father was on the other side of aus.
long story , I wrote one my self for $300 and signed it, Dad.
They never queried the receipt saying "DAD" but did the amount that was written down.
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

DEATH TO VICROADS!!!!!!!!

went to register my mates nissan silvia for him yesterday. same deal as joel. car came out of the factory with ca18det (1.8l turbo) and the car has an sr20det in it now. due to the fact that its more than a 10% power increase that car needs engineering even though those models had the sr20det in them from factory aswell.

Just because it was an s13 i had two blokes going over the car. now it needs engineering for the sr20 when its totally unnecessary :roll:
Posts: 8
Joined: Wed Jan 25, 2006 2:48 pm
Location: NSW

Post by jbonevia »

hokey wrote:DEATH TO VICROADS!!!!!!!!

went to register my mates nissan silvia for him yesterday. same deal as joel. car came out of the factory with ca18det (1.8l turbo) and the car has an sr20det in it now. due to the fact that its more than a 10% power increase that car needs engineering even though those models had the sr20det in them from factory aswell.

Just because it was an s13 i had two blokes going over the car. now it needs engineering for the sr20 when its totally unnecessary :roll:
I went through all that when i had my silvia in vic. Originally CA18DE and changed to SR20DET, Vicroads didnt care about the power increase, they said the SR20 version of the silvia was a different car to the CA18 version :roll: so had to get an engineers certificate.
Posts: 1990
Joined: Sun Jan 14, 2007 9:14 am
Location: Melbourne

Post by T_Diesel »

When you pay your Vic Roads registration you pay double tax. They apply GST of 10% and then you also pay stamp duty on the GST you have paid aswell.

Welcome to the most highly taxed country in the world.
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

T_Diesel wrote:When you pay your Vic Roads registration you pay double tax. They apply GST of 10% and then you also pay stamp duty on the GST you have paid aswell.

Welcome to the most highly taxed country in the world.
what???

Tax revenue is 51.3% of Sweden's GDP, 50.3 Denmark, 45.4 Belgium, 44.3 Norway, 44.0 France...all countries with astounding standard of living.

Australia is 27th at 30.9% below NZ at 17 with 36.6% of GDP

But it was stiff of Vicroads. I paid $2k for my car and payed the comparable $80 stamp duty. Even though the market worth is closer to $4k
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 73
Joined: Mon Oct 23, 2006 3:21 am
Location: victoria

Post by macey »

Bet that was seaford vic roads< i found vic roads much easier for mods with 4wd in rye. They wouldnt know what an intercooler is lol
Sumthing on the menu!
Posts: 210
Joined: Wed May 16, 2007 7:10 pm
Location: Geelong

Post by VKYOOT »

vicroads are the silliest norti werd in geelong or colac.

i have managed to pass an injected 304 holden V8 in VK commodore (custom made ute no the less). asked if it was a standard fitted motor to that vehicle....i answered yes and away i went........till i got defected and the rwc inspector asked for engineers cert for the v8 (it was engineered for a vn V6 motor).

Another m8 also passed a 3t celica motor in his KE20 corolla by modifying the standard 3k air cleaner to fit the 3t and they didnt ask ne questions whatsoever.
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

if you got away with paying stamps on 5k count yourself lucky book value is a lot more and thats what he could have got you with.

a mate of mine had to pay stamps on a fx hodlen that he had owned for 13 years and never registered got him for stamp duty on 24k for a fully restored car
new fx in the 1950's sold for about 1800 pounds go figure that
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

bought my last car interstate a while ago.....anyway it had few months rego and the guy was good enough to let me drive till the reg ran out.....but I did fill in the interstate change of ownership form which he put in........When I turned up to VIC roads to transfer into my name and pay my rego and stamp duty etc etc.....

Ended up paying for 12mths rego and new plates and walked out............I ask no questions save me $$$$$ no transfer fee or stamp duty.....
Posts: 14
Joined: Mon Jul 07, 2008 8:55 pm
Location: s.e melb

Post by banjes »

i got a question

ive got a vl turbo rb30e in my swb gq , when i go in to say ive changed the engine from a 4.2L to rb30et will i be sweet ?
as gq's came out with rb30's although they were carby
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

Wow the vic roads up here is dumb as dog sh!t!

Mate had a chopped down patrol with a gen 3 in it took it to vicroads and the guy said didn't think these come out in an extra cab and my mate yeah they did....

Then he poped the bonet and the guy said is the stock motor my mate said yeah and the guy said i think i remeber them comin out with them.....Even though it had holden written all over the motor.....

Sounds like i got nothin to complain about up here! ;)
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

i think you should be fine with the RB30 motor in your patrol
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

suzuki boy wrote:Wow the vic roads up here is dumb as dog sh!t!

Mate had a chopped down patrol with a gen 3 in it took it to vicroads and the guy said didn't think these come out in an extra cab and my mate yeah they did....

Then he poped the bonet and the guy said is the stock motor my mate said yeah and the guy said i think i remeber them comin out with them.....Even though it had holden written all over the motor.....

Sounds like i got nothin to complain about up here! ;)
so they are expected to know wvery make and model of car thats come out, and alsop exactly what engines came in them?

Asking a bit much, i rekon your mate is as dumb as dog shit for trying to push something through the rego without the approriate engineering. People like your mate is exactly why they make it tougher and tougher to modify vehicles.
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

Shadow wrote:
suzuki boy wrote:Wow the vic roads up here is dumb as dog sh!t!

Mate had a chopped down patrol with a gen 3 in it took it to vicroads and the guy said didn't think these come out in an extra cab and my mate yeah they did....

Then he poped the bonet and the guy said is the stock motor my mate said yeah and the guy said i think i remeber them comin out with them.....Even though it had holden written all over the motor.....

Sounds like i got nothin to complain about up here! ;)
so they are expected to know wvery make and model of car thats come out, and alsop exactly what engines came in them?

Asking a bit much, i rekon your mate is as dumb as dog shit for trying to push something through the rego without the approriate engineering. People like your mate is exactly why they make it tougher and tougher to modify vehicles.


X2 shadow
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

Man of Cheese wrote:so you paid stamp duty on $5000 yea man WTF i would have said tax me on the $3000 thats how much i paid for it.
Thats what I said, he responded that it was taxable on the vehicle as it was at the time of registration, could have been taxed on $20k so I'm not complaining, it's just how usleess and inconsistant they are.

Cheers

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

Wow the vic roads up here is dumb as dog sh!t!

Mate had a chopped down patrol with a gen 3 in it took it to vicroads and the guy said didn't think these come out in an extra cab and my mate yeah they did....

Then he poped the bonet and the guy said is the stock motor my mate said yeah and the guy said i think i remeber them comin out with them.....Even though it had holden written all over the motor.....

Sounds like i got nothin to complain about up here


and if he was involved in a fatal accident it won't be vicroads that get a rap around the knuckles, but that TOOL trying to stoog vicroads. and he won't get away with 'they said this or that' because they are just office workers at the end of the day. your mate gets my dickhead award...... :bad-words:
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Post Reply

Who is online

Users browsing this forum: No registered users and 57 guests