Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What is the biggest tyre engineered in NSW

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 17
Joined: Wed Jul 25, 2007 8:10 pm
Location: Albion Park Rail

What is the biggest tyre engineered in NSW

Post by ahunter77 »

Hey guys just wondering what is the biggest tyre size people have got engineered in NSW on their GQ's
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Dunno about GQ. But there is a 80series enginered for 44's and about to be sold, but on 39's.
THOUGHT FOR THE DAY....
Posts: 36
Joined: Thu Oct 05, 2006 8:25 pm

tyre size

Post by Bezman »

Federal and State Acts, allow for a 50mm increase in tyre diameter, for an 80's to be engineered "legally" it would have to have diffs fitted from a vehicle that orinally had tyres within 50mm of 44 inch tyres. just because it has an engineers certificate doesnt make it legal.
Posts: 17
Joined: Wed Jul 25, 2007 8:10 pm
Location: Albion Park Rail

Re: tyre size

Post by ahunter77 »

[quote="Bezman"]Federal and State Acts, allow for a 50mm increase in tyre diameter, for an 80's to be engineered "legally" it would have to have diffs fitted from a vehicle that orinally had tyres within 50mm of 44 inch tyres. just because it has an engineers certificate doesnt make it legal.[/quote]

Hey mate what is the point of taking it to a RTA authorised engineer if you still end up with illegal mods? cheers
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Bezman,
I never said it was legal. I just know of an 80series that was engineered on 44's. I am pretty sure Terry Smith used to own it. And it has been to the around aust like that.
Your also correct theres some ADR's that say no more than 50mm.
But that dosent seem to apply in NSW.
THOUGHT FOR THE DAY....
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re: tyre size

Post by turps »

ahunter77 wrote: Hey mate what is the point of taking it to a RTA authorised engineer if you still end up with illegal mods? cheers

I really dont under stand why its being allowed. But even in Vic while I can get away with 35's I will run them.
THOUGHT FOR THE DAY....
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Post by MyGQ »

My GQ has passed Engineering with 35 Wranglers as well as blue slip so its legal on road with that stuff.

Mate has a Hilux with a V8 and engineered for 37's
AA's for Quitters
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

Image
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Posts: 36
Joined: Thu Oct 05, 2006 8:25 pm

tyre size

Post by Bezman »

Some engineers sometimes interpret things the way they like for the prices they charge. Federal Acts overide State Acts (goto DOTARS). Police RTA and other State authorities are not focused on getting modified 4WD's off the road as we are only a miniority of road users who mainly use on weekends in the bush, and not chucking donuts on a Friday night in front of a main stream "Maccas" audience. The Authorities set and interpret the law not the engineer. Im just saying be careful you dont get dragged over the pits because you think your covered by an Engineers report.
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

To answer the original question, have 37's on my GU and was fully engineered 3+ years ago. Police and RTA take one look at the certificate, check that it is legit and say 'bugger off / get out of here'.

...it cost an arm and a leg though. ...so it's kinda hard to drive these days. :D
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests