HI, will 33s fit under a stock middy without rubbing or will i need a lift?
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33s under stock middy
Moderators: toaddog, Elmo, DUDELUX
Depends on your rim offset and tyre width. You will find with flexy rear suspenison even stock wheels and tyres 31x10.5R15 will come close to rubbing on the rear inner guards. No amount of lift will fix this because when you flex to the bump stops and the other side dropped right down it will happen. Its not to bad though aslong as your wheel wells are smooth and the tyre cant tear on anything.
I run 35''s with a lift of about 2'' suspension on a good day, front diff forward 15mm and widened track by ~35mm each side. No rubbing at all on the rear inner guards and the front only rubs on the top of the front guards, so I cut them out.
I run 35''s with a lift of about 2'' suspension on a good day, front diff forward 15mm and widened track by ~35mm each side. No rubbing at all on the rear inner guards and the front only rubs on the top of the front guards, so I cut them out.
Who is online
Users browsing this forum: No registered users and 1 guest