second uni joint my drovas done in 2 months
. just smashed all the bearings out of 1 cap. i cant get a replacement till monday. how long can i drive on it for b4 it shites itself good and proper
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
farked uni joint.
farked uni joint.
hey guys.
second uni joint my drovas done in 2 months . just smashed all the bearings out of 1 cap. i cant get a replacement till monday. how long can i drive on it for b4 it shites itself good and proper
second uni joint my drovas done in 2 months
. just smashed all the bearings out of 1 cap. i cant get a replacement till monday. how long can i drive on it for b4 it shites itself good and proper85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
88 tb42 swb mav,35 claws, 4 inch lift
If you're absolutely desperate you could take one off the front driveshaft and swap it with the farked one till Monday. Obviously you cannot use 4wd or have the hubs locked at all.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
However, if it's on the axle end (so on the shaft not the slip yoke) you're likely to stuff the uni trying to swap it.
If the uni is as bad as you say and you are daily driving, it will fail catastrophically very soon. If the process, it's likely to smash the yokes and break the driveshaft meaning instead of just a $30 uni, you're going to be up for a $150 driveshaft.
Is it the same uni that's failed in 2 months? If so, you have some major angle problems (or you're not installing them right)
If it's a different uni, maybe go through and replace them all - they're obviously all going to be on their way out.
Steve.
If the uni is as bad as you say and you are daily driving, it will fail catastrophically very soon. If the process, it's likely to smash the yokes and break the driveshaft meaning instead of just a $30 uni, you're going to be up for a $150 driveshaft.
Is it the same uni that's failed in 2 months? If so, you have some major angle problems (or you're not installing them right)
If it's a different uni, maybe go through and replace them all - they're obviously all going to be on their way out.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest