a few months ago i got my front shaft lenghened but since then ive done ruf and the shaft now is too small well i think it is need to double cheak tomrow.
i was under the car and pushed up onto the front shaft and it moved up and down. like there play in it so im thinking its too short in the splines.
is it posible just to get the splines and slipyoke lenghtend or would i have to get the shaft extened again?
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
quick question on driveshaft extention
quick question on driveshaft extention
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Getting the shaft lengthened would cost around $120-$200
Having the shaft remade with longer splines/slip yoke is likely to cost about a billion dollars.
I'd maybe try a spacer at the transfer end until you get your setup dialled in. you should only need an inch or so.
Steve.
Having the shaft remade with longer splines/slip yoke is likely to cost about a billion dollars.
I'd maybe try a spacer at the transfer end until you get your setup dialled in. you should only need an inch or so.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
any reason you say to put spacer at transfer end??Gwagensteve wrote:Getting the shaft lengthened would cost around $120-$200
Having the shaft remade with longer splines/slip yoke is likely to cost about a billion dollars.
I'd maybe try a spacer at the transfer end until you get your setup dialled in. you should only need an inch or so.
Steve.
michael
Neater and less obvious, also, less side loading - the transfer only does suspension angle changes, the diff end does axle wrap as well, and the front end of a SPOA sierra will axle wrap a LOT.
Less likely to drag it on rocks etc too.
You could argue the other way too, but that's my preference.
Steve.
Less likely to drag it on rocks etc too.
You could argue the other way too, but that's my preference.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Gwagensteve wrote:Neater and less obvious, also, less side loading - the transfer only does suspension angle changes, the diff end does axle wrap as well, and the front end of a SPOA sierra will axle wrap a LOT.
Less likely to drag it on rocks etc too.
You could argue the other way too, but that's my preference.
Steve.
Also helps the shaft clear the crossmember if you have lots of droop.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
took the shaft off today had a look. looks fine no twists or anything. the spline goes in about half way into the slip yoke at normal height.
to quickly work out how much longer i need it. i have 1.5inch up travle does that mean i need to extened the shaft 1.5inch or so?
to quickly work out how much longer i need it. i have 1.5inch up travle does that mean i need to extened the shaft 1.5inch or so?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Who is online
Users browsing this forum: No registered users and 1 guest