Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
re fitting head question 1.3
re fitting head question 1.3
just got the head machined and fitted a new piston , do i just turn engine till No 1 is at the top then turn the head / camshaft till the valves are closed at no 1 also . its not together yet thought it mite be easyier if its not fitted. any advise would apreciated. cheers ron
Guess your talking about timing , there are links to online manuals here , they will have the timing setup , also keyway in crankshaft always faces up and the cam timing mark is on the metal cover behind the cam pulley , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Who is online
Users browsing this forum: No registered users and 1 guest