Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

blown seal

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

blown seal

Post by waandy »

my front diff is leaking oil from the ball and cup joint. is it a big job to replace these and how bigger job is it?
cheers waandy
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 57
Joined: Wed Dec 14, 2005 8:57 pm
Location: shoalhaven nsw

Post by T-rex »

its the inner axel seal that needs replacing, bout the size of a 20c piece not verry expencive. not hard to replace just behind your cv in the axel tube just pop it out with a screwdriver.will have to replace your cv grease too.
Top
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

Post by waandy »

ok awesome. any other seals worth replacing while im in there? have to order em and get busy.
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay

Post by mrw82 »

get a hub seal kit from www.onlineautoparts.com.au cost $89.50 plus postage, kit will do BOTH sides of the car and is cheaper than anywhere else. make sure you check/replace your wheel bearings while your at it.
not a hard job to do just messy and time consuming, I am going through it at the moment.

had the same thing as you, oily grease leaking out the knuckle when I checked it out I had about 5mm of play on the kingpin bearings, now that I have them out they are full of gunk and jammed up.


cheers,
Mark.
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

Here's my rebuild from a while back, not hard but time consuming cleaning everything up.

http://www.outerlimits4x4.com/ftopic127 ... ub+rebuild
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 86 guests