Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Good U.S. Stores

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Good U.S. Stores

Post by Red04VXE »

Hey guys, anyone got any links to good Yanky shops.
I've tried a few but don't get replies to emails, mostly can't remember who i've sent them as well.
S.E.Qld Locals Crew.....
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

Tom Woods is outstanding for propshafts
http://www.4xshaft.com/index.html

In depth reply to emails, prompt but best to call.... and make sure you have an internet phone card and a lot of time to chat! Bet extremely helpful, very kind and generous and everything will be done legit. Shafts are manufactured and arrive to your door within 5 working days.


Tirerack is pretty good also for tyres.
http://www.tirerack.com/

Reply promptly to emails, great to deal with, does not take Aussie CC's so need to transfer money manually. Tyres arrive to your door within 5 working days expedited.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 416
Joined: Sun Jul 01, 2007 1:04 pm
Location: In a van down by the river.

Post by locktup4x4 »

If you are having trouble sourcing parts in the US you can email or pm me and I will try and help.

Jason
LOCKTUP4X4.COM.AU
LOCKTUPFABRICATION.COM
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

mate emailing the us is like putting a message in a bottle. Ring and speak to someone and then email them directly. I have brought in a fair bit (114k in one order with honda) from the US and they still don't reply to email a few months later. some company's are great in replying but they are few and far between.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Re: Good U.S. Stores

Post by Red04VXE »

grimbo wrote:
Red04VXE wrote:Hey guys, anyone got any links to good Yanky shops.
I've tried a few but don't get replies to emails, mostly can't remember who i've sent them as well.

good Yanky stores for what products?
Well I asked in the GENERAL 4X4 Tech Section of a 4wd Forum.

Lockers, Reduction Gears, Diff Gears and other bits to Suit 60 Series to be more specific.
S.E.Qld Locals Crew.....
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Post by Red04VXE »

locktup4x4 wrote:If you are having trouble sourcing parts in the US you can email or pm me and I will try and help.

Jason
I did last night via website.
Re. LockRights and Longfields
S.E.Qld Locals Crew.....
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Re: Good U.S. Stores

Post by grimbo »

Red04VXE wrote:
grimbo wrote:
Red04VXE wrote:Hey guys, anyone got any links to good Yanky shops.
I've tried a few but don't get replies to emails, mostly can't remember who i've sent them as well.

good Yanky stores for what products?
Well I asked in the GENERAL 4X4 Tech Section of a 4wd Forum.

Lockers, Reduction Gears, Diff Gears and other bits to Suit 60 Series to be more specific.
yeah we get that but it could have been for a variety of products or vehicles that's all. Sorry for trying to get more info so as to provide a good answer
Ransom note = demand + collage
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

put your foot in it again grimbo lol ;)
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

ajsr wrote:put your foot in it again grimbo lol ;)
not quite sure how. It could have been to buy plasma rope so www.rockstomper.com or perhaps stuff for a Suzuki www.trailtough.com www.calmini.com or a nissan www.purenissan.com but apparently we should have known it was for a 60 Series
Ransom note = demand + collage
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

here ya go: http://www.quadratec.com too bad you don't have a jeep, i got their catalogue in the mail last week and it's got 450 pages of accessories just for wranglers. It's twice as thick as the entire aussie ARB catalogue. There's some top stuff in the US but toyotas are kinda in the minority
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Post by Red04VXE »

Jeeps wrote:here ya go: http://www.quadratec.com too bad you don't have a jeep, i got their catalogue in the mail last week and it's got 450 pages of accessories just for wranglers. It's twice as thick as the entire aussie ARB catalogue. There's some top stuff in the US but toyotas are kinda in the minority
I used to, The roll bars work mint.



Thanks for the PM's with some places.

www.rocky-road.com www.justdifferentials.com

www.toyotasuperaxles.com
S.E.Qld Locals Crew.....
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

www.polyperformance.com

Bought thousands of $ worth of gear from there and never had to lift the telephone. Just find what you want on their site and then e-mail them asking for a quote including freight. If you work out the time zones properly you'll get an answer straight away.
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Post by Red04VXE »

S.E.Qld Locals Crew.....
Posts: 10
Joined: Sun Apr 29, 2007 9:10 pm
Location: Vic

Post by Kalex »

Slunnie wrote:Tom Woods is outstanding for propshafts
http://www.4xshaft.com/index.html

In depth reply to emails, prompt but best to call.... and make sure you have an internet phone card and a lot of time to chat! Bet extremely helpful, very kind and generous and everything will be done legit. Shafts are manufactured and arrive to your door within 5 working days.


Tirerack is pretty good also for tyres.
http://www.tirerack.com/

Reply promptly to emails, great to deal with, does not take Aussie CC's so need to transfer money manually. Tyres arrive to your door within 5 working days expedited.
Hi Slunnie, how much does it cost for shipping of tyres?
Posts: 523
Joined: Sun Feb 17, 2008 8:59 pm
Location: Flagstone QLD

Post by Red04VXE »

Red04VXE wrote:Has anyone dealt with these guys?

http://www.ronsmachiningservice.net/servlet/StoreFront
Just to let ya's know, $620USD to my door in 7Days for a pair of Lock Rights. :armsup: :armsup:
S.E.Qld Locals Crew.....
Posts: 214
Joined: Mon Jan 21, 2008 11:04 am
Location: NEWCASTLE

Post by HANCOCK »

Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

www.atlanticspeed.com for gauges.

People have also had allot of success with www.egauges.com too :)
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

www.locktup4x4.com

Can't suggested them enough. I needed some wheel spacers ages ago, thes guys have been that good. I'd happy send any one there way!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest